Fan & Exhaust Ducts

Fan Accessories - Aluminium Flexible Duct Fitting

$18.13

Description:
Flexible duct that can be cut down to suit required length. Non-insulated, single layer ducting.

Recommendations:

Choose the correct size duct to suit your exhaust fan and vent for best result.
Cut-off any excess duct once the duct is extended to its required length.
Secure the duct with clamps or tape (not included)
Elbows and turns should be kept to a minimum.

Variant:

Aluminium Duct ø100mm x 3M Length
Aluminium Duct ø150mm x 6M Length

Backdraft Damper (Spring Loaded) in 100/125/150/200/250/315mm

$22.00

Description:

The tube is constructed from galvanised steel and the flaps from aluminium. Flaps are spring-loaded and when the fan is switched off they close providing a seal.

Order Code:

FANRSK100 - Ø 100mm
FANRSK125 - Ø 125mm
FANRSK150 - Ø 150mm
FANRSK200 - Ø 200mm
FANRSK250 - Ø 250mm
FANRSK315 - Ø 315mm

361m³/hr Minitube in-Line Duct Mounted Kit (MTP132+6M Duct+internal/External Grille)

$296.64

Description:
Includes MTP132 (150mm in-line duct fan), 6m duct, internal & external grilles.

Features:
• Quiet operation
• Exhaust to outside of building
• BCA compliant for ventilation and energy efficiency (when using optional backdraft damper)
• Air flow adjustable and easy to install DJG Ceiling Grille supplied with MTPILK150 and RILK150HP kits
• Fan in RILK150HP kit includes an external mounted 2-speed switch
• Fans are rated “Continuous Run”
• Internal thermal motor cutout protection
• 220-240V, single-phase, 50Hz
• Flexible duct fire rated to AS/NZS4254
• Fans can be connected to a run-on timer or speed controller (excludes MTPILK150 kit)
• 361m³/h

576m³/hr Fantech Trade Provent in-Line Duct Mount Fan Kit (RIL-150SW+6M Duct+internal/External Grille)

$400.50

Description:
Includes RIL-150SW (150mm in-line duct fan), 6m duct, internal & external grilles

Features:
• Quiet operation
• Exhaust to outside of building
• BCA compliant for ventilation and energy efficiency (when using optional backdraft damper)
• Air flow adjustable and easy to install DJG Ceiling Grille supplied with MTPILK150 and RILK150HP kits
• Fan in RILK150HP kit includes an external mounted 2-speed switch
• Fans are rated “Continuous Run”
• Internal thermal motor cutout protection
• 220-240v, single-phase, 50Hz
• Flexible duct fire rated to AS/NZS4254
• Fans can be connected to a run-on timer or speed controller (excludes MTPILK150 kit)
• 443m³/h (Low), 576m³/h (High)

270/360m³/hr Provent in-Line Duct Mounted Fan Kit (RIL-125+6M Duct+internal/External Grille)

$397.80

Description:
Includes RIL-125 (125mm in-line duct fan), 6m duct, internal & external grilles.

202/245m³/hr Provent in-Line Duct Mounted Fan Kit (RIL-100+4M Duct+internal/External Grille)

$334.08

Description:
Includes RIL-100 (100mm in-line duct fan), 4m duct, internal & external grilles.

Sleek Linear Dual Slot Exhaust Grille

$251.52

Description:
The sleek looking Linear Slot internal exhaust grilles have been designed to suite the modern and contemporary bathroom, ensuite or toilet. They come with a 150mm duct connection, are available in single and dual slot, and come in white and anodised silver finish.

Features:
• Discretely blends into the latest architecturally designed bathroom or ensuite.
• Works in conjunction with a duct mounted, roof mounted or external wall mounted fan. High quality galvanised steel cushion head box.
• Oval spigot allows 150mm duct connection.
• Available with single slot, or dual slot for additional air flow.

Heat Transfer in-line Duct Mounted Kits for 1:1/1:2/1:3 Room Fantech Trade

$474.61

Description:
Heat Transfer Kits are designed to draw warm air from a room with a heat source such as a fireplace or potbelly stove, and deliver this warm air to other areas of the house. They are easy to install and economical to run.

Features:
• High air velocity into rooms ensures warm air reaches the occupants.
• Kits include all necessary components.
• Easy to install and economical to run
• High quality in-line fan

Kit includes (shown left-to-right in image):
1. High Performance Mixed-flow In-line Fan
2. Adjustable Grille
3. Insulated Duct
4. Duct Tape
5. Branch Take Off (available in one to two room kit and one to three room kit only)

Flexible Duct Non-insulated in 200mm, 250mm or 300mm

$32.40

Features:
• Suitable for general exhaust and supply air applications such as bathrooms, en suites and toilets.
• Fibre woven metallic duct provides durability and tear resistance
• High tensile wire sprung to retain duct shape and flexibility
• Complies with Australian/New Zealand Standards:
Construction contains high grade flame retardant with a 3 zero fire rating , AS/NZS 4254

Duct Diameter, mm	Duct Length, m	Bulk Pack Contents
200	6	20 lengths
250	6	20 lengths
300	6	20 lengths

Flexible Duct Non-insulated in 100mm, 125mm or 150mm

$23.00

Features:

• Suitable for general exhaust and supply air applications such as bathrooms, en suites and toilets.
• Fibre woven metallic duct provides durability and tear resistance
• High tensile wire sprung to retain duct shape and flexibility
• Complies with Australian/New Zealand Standards: Construction contains high grade flame retardant with a 3 zero fire rating , AS/NZS 4254

Duct Diameter (mm)	Duct Length (mm)	Bulk Pack Contents
100	6000	20 lengths
125	6000	20 lengths
150	6000	20 lengths

Accessories: Double Branch Take Off (BTO) Duct Fittings 300-3x200mm

$64.80

Description:
Designed to divide air flow in ducted systems. Made from injected-moulded ABS flame retardant material.

Duct Diameter, mm (Fan Side)	No. of Duct Branches	Branch Diameters, mm
300	3	200

Accessories: Double Branch Take Off (BTO) Duct Fittings 250-3x200mm

$61.20

Description:
Designed to divide air flow in ducted systems. Made from injected-moulded ABS flame retardant material.

Duct Diameter, mm (Fan Side)	No. of Duct Branches	Branch Diameters, mm
250	3	200

Accessories: Double Branch Take Off (BTO) Duct Fittings 200-3x150mm

$48.00

Description:
Designed to divide air flow in ducted systems. Made from injected-moulded ABS flame retardant material.

Duct Diameter, mm (Fan Side)	No. of Duct Branches	Branch Diameters, mm
200	3	150

Accessories: Branch Take Off (BTO) Duct Fittings

$61.20

Description:
Designed to divide air flow in ducted systems. Made from injected-moulded ABS flame retardant material.

Specifications:

Brand Name: Fantech Trade
Product Name: Branch Take Off (BTO)
Category: Accessories - Duct Fittings
Colour: Black
Material: Metal, Plastic
Phase: 3-Way
Duct Diameter (Fan Side): ø200mm
No. of Duct Branches: 2
Branch Diameters: ø200mm & ø150mm

Accessories: Branch Take Off (BTO) Duct Fittings

$51.60

Description:
Designed to divide air flow in ducted systems. Made from injected-moulded ABS flame retardant material.

Specifications:

Brand Name: Fantech Trade
Product Name: Branch Take Off (BTO)
Category: Accessories - Duct Fittings
Colour: Black
Material: Metal, Plastic
Phase: 3-Way
Duct Diameter (Fan Side): ø150mm
No. of Duct Branches: 2
Branch Diameters: ø150mm

Accessories - ALG internal Grilles 200mm Ceiling Mounted

$61.20

Description:
Ceiling-mounted round adjustable inlet grille for 200mm ducting in white. Air flow can be easily adjusted by rotating the control disk. Sleek, stylish design with a non-reflective white surface. High quality ABS plastic, scratch & chip resistant.

Specifications:

Brand Name: Fantech Trade
Product Name: ALG
Category: Accessories - Internal Grilles
Ducting Suitable: 200mm
Colour: White
Adjustable: Yes

Dimensions (Reference Diagram):

Duct Diameter (A): ø200mm
Face Diameter (B): ø315mm
Face Depth (C): 16mm
Recessed Depth (D): 95mm
Hole Cutout: ø282mm

Accessories - PVC Flexible Duct Ventair - DCT0336, DCT0337, DCT0338

$30.44

Description;

Quality PVC flexible ducting to suit most Manrose exhaust products.

Dimension:

Available in various sizes and lengths

DCT0336 - 100mm diameter x 3000mm
DCT0337 - 125mm diameter x 4000mm
DCT0338 - 150mm diameter x 5000mm

Accessories - Semi-Rigid Aluminium Duct Ventair - DCT0115, DCT0117

$39.89

Description:

SEMIDUCT is also known as semi-rigid aluminium ducting is a lightweight, flexible but strong corrugated aluminium duct. It is spiral wound with a unique interlocked and knotted continuous seam. It is self supporting over longer lengths and generally only needs fittings or mechanics at each end for support.

Dimension:

Available in various sizes and lengths (Expandable 1m-3m)

DCT0115 - 125mm diameter x 3000mm
DCT0117 - 200mm diameter x 3000mm

Accessories - Duct Joiner PVC 100mm Ventair - DCT0159

$17.84

Description:

100mm PVC Plastic Joiner designed to connect two lengths of 100mm duct.

Features:

Smooth internal lines with no sharp edges
UV stabilised
Heavy duty and robust

Order Code:
DCT0159

Accessories - Duct Joiner Metal Short 150mm Ventair - DCT0059

$18.89

Description:

150mm Metal Duct Joiner designed to connect two lengths of 150mm duct.

Dimension:

Duct Size: 150mm
Joiner Width: 145mm
Joiner Length: 145mm
Joiner Height: 85mm

Order Code:
DCT0059

Fan Accessories - PVC Duct Reducer in White Ventair - DCT2067, DCT2066

$20.99

Description:

PVC white duct reducer.

Dimension:

DCT2067:

125mm ducting to 100mm ducting.

DCT2066:

150mm ducting to 125mm ducting

Order Code:

DCT2067 - 125mm-100mm
DCT2066 - 150mm-125mm

Fan Accessories - PVC Y Branch 100mm Ventair - DCT2182

$24.14

Description:

Manufactured from HDPE. U.V. stabilised. Heavy duty and robust. Smooth internal lines. No sharp edges. Positive lock duct tabs.

Dimension:

DCT2182:

Duct Size: 100-100-100mm

Order Code:

DCT2182 - 100mm

Accessories - insect Mesh Grillles To Suit Fixed Louvre, Gravity Shutter, Eggcrate Ventair - DCT0371, DCT0208, DCT0207

$14.69

Description:

Insect mesh suitable for fixed, gravity shutter and eggcrate grilles.

Order Code:

DCT0371 - 100mm (measured 120mm square)
DCT0208 - 125mm (measured 137mm square)
DCT0207 - 150mm (measured 157mm square)

Note: Cutouts are slightly bigger than the stated size to allow for some cutting to fit and or overlap over the opening

Exterior Aluminium Vent w/ Duct Adaptor in ø150mm Ventair - V150PALG

$121.79

Description:
Premium exterior aluminium vent with duct adaptor - Inbuilt wire mesh. Fits standard brick-sizes.

Order Code:
V150PALG

Duct Adaptor 150mm-100mm Ventair - VDA100-150 Duct Adaptor 100mm-150mm Ventair - VDA100-150

$25.20

Description:
Duct outlet 150mm reduces down to 100mm duct outlet.

Order Code:
VDA100-150

Aluminium Ducting Available in 100mm/125mm/150mm/200mm Ventair

$16.92

Description:
Aluminium Ducting for Ventair Exhaust Fans.

Specifications:

Model Number	Diameter	Length
VAD100	ø100mm	3000mm
VAD100-6	ø100mm	6000mm
VAD125	ø125mm	4000mm
VAD150-3	ø150mm	3000mm
VAD150	ø150mm	6000mm
VAD200-6	ø200mm	6000mm
VAD200-3	ø200mm	3000mm

Ducting Kit in 100mm or 150mm with 3000mm/6000mm Ducting Aluminium and Grille Ventair

$24.99

Description:
100mm/150mm Ducting Kit including Aluminium Ducting and Fixed Exterior Grille.

Features:
• 100mm or 150mm ducting kit
• Suitable for most exhaust fan units with 100mm/150mm side duct outlet
• Adaptable to most bathroom 3 in 1 units with 100mm/150mm side duct outlet
• New or existing exhaust fans

Specifications:

Model Number	V100DKIT	V150DKIT
Grille Size	150mm x 150mm	150mm x 150mm
Duct size	3m long x 100mm diameter	6m long x 150mm diameter
Grille Cutout	107mm diameter	107mm diameter

210m³/hr Ventair Shower Light and in-line Exhaust Fan Kit w/ LED Light 150mm in White - VEDLKWH 210m³/h Ventair Shower Light and in-line Exhaust Fan Kit w/ LED Light 150mm in White - VEDLKWH

210m³/h Ventair Shower Light and in-line Exhaust Fan Kit w/ LED Light 150mm in White - VEDLKWH

$215.24

Description:
150mm Inline exhaust fan kit including a modern internal fascia with 10w LED centre light, External fixed grille and 4m Aluminium Ducting.

Features:
• Energy saving LED light
• Long life ball bearing motor
• Easy to install
• Full ducting kit included

Included:
• 1 x Inline exhaust motor
• 1 x External grille
• 1 x Internal air intake grille with LED light
• 1 x 4m Aluminium Ducting (150mm)

Specifications:

Model Name	Shower Light & Exhaust
Model Number	VEDLKWH
Colour	White
Air Delivery	210m³/h
Grille Size	210mm Round
Cut out size	158mm Round
Min. install depth	200mm
Noise Level	39db(A)
IP Rating	IPX4
Ball bearing motor	Yes
Fan size	150mm
Motor Power	25w
Duct outlet size	150mm diameter
LED Wattage	10w
LED Lumens	855Lm
Colour Temperature	Natural White 4200K

250m³/hr Ventair Air Transfer Kit in-line Exhaust Fan 150mm in White - VATK150 250m³/h Ventair Air Transfer Kit in-line Exhaust Fan 150mm in White - VATK150

250m³/h Ventair Air Transfer Kit in-line Exhaust Fan 150mm in White - VATK150

$221.54

Description:
150mm inline exhaust fan kit including modern internal fascias and 6m aluminium ducting.

Features:
• Ideal for Warm/Cold Air Transfer
• Long Life Ball Bearing Motor
• Easy to Install
• Adjustable air intake/outlet vents included
• 3 year warranty

Included:
• 1 x Inline exhaust fan
• 2 x Adjustable air vents
• 1 x 6m Aluminium duct (150mm)

Specifications:

Model Name	Air Transfer Kit
Model Number	VATK150
Colour	White
Air Delivery	250m³/h
Grille Size	206 Round
Cut out size	150 Round
Min. install depth	200mm
Noise Level	41B(A)
IP Rating	IPX4
Ball bearing motor	Yes
Fan size	150mm
Motor Power	25w
Duct Outlet	150mm

CLEARANCE Accessories - Supaflo Low Profile Ducts - Series 165 2m

$19.95

Supaflo Flatpack duct is a low profile alternative to round PVC pipe commonly used in ventilation systems. It has a compact design that makes it ideal for applications where space is limited. It also features a smooth inner surface which minimises pressure loss and therefore improves air flow. The modular, slide-together design of the system makes it simple to install into most applications.

Flat Rigid Duct - 2 metre

Length: 2000mm

Width: 220mm

Height: 90mm

CLEARANCE Accessories - PVC Flexible Duct Ventair - DCT0337

$25.00

Description;

Quality PVC flexible ducting to suit most Manrose exhaust products.

Dimension:

Available in

DCT0337 - 125mm diameter x 4000mm