Interest Free Payments Available
| Model Name | AIRBUS | AIRBUS | AIRBUS |
| Model Number | PVPX200 | PVPX225 | PVPX250 |
| Air Delivery | 152m³/H* | 240m³/H* | 328m³/H* |
| Cut out size | Ø240mm | Ø296mm | Ø296mm |
| Min. install depth | 200mm | 200mm | 200mm |
| Noise Level | 38dB(A) | 42db(A) | 42db(A) |
| Rated Running Time | >50,000 Hrs | >50,000 Hrs | >50,000 Hrs |
| Rated Start Cycles | >10,000 | >10,000 | >10,000 |
| Power Input | 220-240V~50Hz | 220-240V~50Hz | 220-240V~50Hz |
| Installation | Plug and Lead | Plug and Lead | Plug and Lead |
| IP Rating | IPX4 | IPX4 | IPX4 |
| Ball bearing motor | Yes | Yes | Yes |
| Draft Stopper | Yes | Yes | Yes |
| Fan size | 200mm | 225mm | 250mm |
| Motor Power | 30w | 38w | 50w |
| Duct outlet size | Ø100mm | Ø150mm | Ø150mm |
| Warranty on Motor | 5 years | 5 years | 5 years |
| Brand | Ventair |
| Sku(s) | PVPX200, PVPX225, PVPX250 |
| Product Type | Exhaust Fan |
| Fan Size | 200mm, 225mm, 250mm |
| Cut Out Size | Ø240mm, Ø296mm, Ø296mm |
| Min. Install Depth | 200mm |
| Extraction | 152m³/H, 240m³/H, 328m³/H |
| Noise Level | 38dB(A), 42db(A), 42db(A) |
| Power Input | 220-240v~50Hz |
| Motor Power | 30w, 38w, 50w |
| IP Rating | IPX4 |
| Warranty | 5 Years |
The Lighting Outlet delivers the 152/240/328m³/h Ventair Airbus Premium Exhaust Fan - MOTOR ONLY - in ø200mm/ø225mm/ø250mm - PVPX200, PVPX225, PVPX250 Australia wide.
From all the major cities Sydney, Melbourne, Brisbane, Adelaide to all the regoinal and rural towns. No matter where you are, we can get it to you!
We offer a flat $11.95 shipping rate for most metro areas around Australia. If your postcode does not fall into this category, shipping will be calculated at checkout - It's normally not much extra.
Orders with items that require to be ordered can take 3-5 business days to dispatch. Delivery times will vary depending on location (Please see below)
Orders must be a minimum of $200 for us to process. Each country may have importing taxes, it is the customers responsibility to look into their country's importing tax. Australia's 10% GST (goods and service tax) will be removed from orders. Orders must be shipped internationally for the GST to be removed.
Package lengths 2 meters or more will incur a $30 freight charge. This covers the courier's excess size charge and covers heavy duty packing materials needed to send your package safely.
Great unit with phenomenal air extraction
Quality item, easy to install
| Product Quality |
Rated 5 out of 5
|
|---|---|
| Delivery Speed |
Rated 5 out of 5
|
| Overall Experience |
Rated 5 out of 5
|
Very happy with purchase
Sleek
Streamline
Looks great
Bought the Airbus 200 to replace a toilet room halogen light for an Adelaide 80s unit. The unit has a modern and tidy appearance, provides excellent light and is clearly well made compared to my HPM bathroom exhaust. The ventilation is quiet yet powerful and overall I’m very pleased. Online order process was simple and delivery was quick too.
Product was packaged and delivered very promptly. The installation was very easy and suited our guest toilet very well.
Good item as described. Some minor noise as you would expect from an extractor fan. Looks good and modern. For a smaller bathroom/ensuite/laundry. Easy to DIY install.
Quiet , powerful and aesthetically good looking (blend s well)
Will shop here again
It's simple but beautiful design. We installed this product before start bathroom renovation, and used it during work. Light is bright enough and fan is quite strong for our 3m x 2m medium size bathroom. I'll use it next renovation.
| Product Quality |
Rated 5 out of 5
|
|---|---|
| Delivery Speed |
Rated 5 out of 5
|
| Overall Experience |
Rated 5 out of 5
|
The exterior design is great but the design of the ceiling fixing isn't. The fixture's swing out latches only allow for a 20-25mm thick ceiling whereas my ceiling* was dual layered, 50mm thick gyprock.
This required a lot more work. After cutting out the hole I then had to work out the area covered by the latches as they swing out and then cut a rectangular notch in the top layer of gyprock with a Dremel.
Even then, you had to be careful when installing the fan to not force the latches.
I managed it when test fitting the unit but the electrician wasn't so careful and broke one of the latches on install resulting in the light now being held in the ceiling by only 2 latches.
As a former lighting fixture designer myself I'd rate the mechanism 5/10 Max,
It doesn't allow for any variations in ceilings aside from single layer gyprock.
It should be redesigned with either a spring loaded or rotating cam mechanism to accommodate different ceiling thicknesses
* (like others on the top floor of our apartment bloc)
Perfect exhaust fan for your larger bathrooms and ensuites. Sleek appearance and excellent air extraction
