Interest Free Payments Available
Features:
| Product Code | Alpha Code | Watt | Colour Temp. | Lumens | Finish/Colour | Base | Dimensions(mm) | Dimmable |
|---|---|---|---|---|---|---|---|---|
| 22004 | LT810W4K | 10w | 4000k | 900lm | Opal | G13 | ø26 x L600 | No |
| 22006 | LT810W65K | 10w | 6500k | 900lm | Opal | G13 | ø26 x L600 | No |
| 22008 | LT818W4K | 18w | 4000k | 1720lm | Opal | G13 | ø26 x L1200 | No |
| 22010 | LT818W65K | 18w | 6500k | 1720lm | Opal | G13 | ø26 x L1200 | No |
| Brand | Lusion Lighting |
| Sku(s) | 22004-lusion, 22006-lusion, 22008-lusion, 22010-lusion |
| Product Type | Globes |
| Colour | Opal |
| Length | 600mm |
| Diameter | ø26mm |
| Material | Polycarbonate |
| Wattage (Max) | 10w, 18w |
| Globe Base | G13 |
| Colour Temperature | 4000k, 6500k |
| Lumens | 900lm, 1720lm |
| Dimmable | No |
| CRI | >80 |
| Beam Angle | 160° |
| Voltage | 220-240v |
The Lighting Outlet delivers the 10w,18w LED G13 2 Foot, 4 Foot Globe Cool White 4000k, Daylight 6500k Australia wide.
From all the major cities Sydney, Melbourne, Brisbane, Adelaide to all the regoinal and rural towns. No matter where you are, we can get it to you!
We offer a flat $11.95 shipping rate for most metro areas around Australia. If your postcode does not fall into this category, shipping will be calculated at checkout - It's normally not much extra.
Orders with items that require to be ordered can take 3-5 business days to dispatch. Delivery times will vary depending on location (Please see below)
Orders must be a minimum of $200 for us to process. Each country may have importing taxes, it is the customers responsibility to look into their country's importing tax. Australia's 10% GST (goods and service tax) will be removed from orders. Orders must be shipped internationally for the GST to be removed.
Package lengths 2 meters or more will incur a $30 freight charge. This covers the courier's excess size charge and covers heavy duty packing materials needed to send your package safely.
| Product Quality |
Rated 5 out of 5
|
| Delivery Speed |
Rated 5 out of 5
|
| Overall Experience |
Rated 5 out of 5
|
Very well packaged this time. Had a tube delivers previously that was in a cardboard container and was bent in transit and didn't work. This was packed in a pvc cylinder which kept it very safe. Well done.
I am using this LED as an additional light in my spray booth to display the minute imperfections (scratches/swirls/orange peal) down the side of the car, and it does a great job. If you look closely in the pic at the reflection on the side of this SS Commodore you can see how all the orange peal stands out. I have one either side of the car and they work a treat. Highly recommended for this purpose.
| Product Quality |
Rated 5 out of 5
|
|---|---|
| Delivery Speed |
Rated 5 out of 5
|
| Overall Experience |
Rated 5 out of 5
|
Fitting was simple and straight forward. 1.)Power Off 2) Remove Starter switch & fluoro tube. 3.)Stick warning labels where appropriate 4.) Fit supplied fuse into starter switch socket & supplied replacement LED tube into fluor sockets.
(There is a top & botom side to the LED tube indicated by a longitudal strip approx. 1cm wide on the top. Works the other way but looks a bit odd.)
That's it - simple. Power on. Let there be light!!
Simple to fit into existing fluorescent light. Simply remove the existing fluorescent tubes, replace the fluorescent "starter" with the supplied fuse (designed to fit into the starter socket) and these tubes work straight out of the box. Safety conscious: each tube comes with a safety fuse (not sure you get this with other LED tubes I looked at) and labels to show that the starter has been replaced and also a "Danger" label to warn anyone replacing the tubes that only LED tubes should now be used in the fitting (as the starter has been replaced). I fitted 4 tubes in total into very old (1970s) fluorescent fittings and they are much brighter than the old tubes, use half the electricity and the light turns on immediately. You don't need to, but if you can get an electrician to re-wire the fitting ("luminaire") and disconnect the old fluorescent light "ballast" (which uses a small amount of power) the LED lights are slightly brighter (I had one fitting re-wired). If you are removing the ballast and rewiring the luminaire, you need to know that these tubes have a single driven end. There are 2 electrical pins on each end of the tube: on one end (the driven end) the pins need to be connected to Live and Neutral, on the other end of the tube (non-driven end) both pins are connected to Neutral. If you are simply using your existing fluorescent fitting, you can ignore this - replace the starter with the fuse, fit the new LED tube and it just works.
| Product Quality |
Rated 5 out of 5
|
|---|---|
| Delivery Speed |
Rated 5 out of 5
|
| Overall Experience |
Rated 5 out of 5
|
Easy to install, Throws more light than the standard fluro tubes.
| Product Quality |
Rated 5 out of 5
|
|---|---|
| Delivery Speed |
Rated 5 out of 5
|
| Overall Experience |
Rated 5 out of 5
|
