* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Top bend flexible neon LED strip, 16mm, white or RGBW, IP67
A mid size 16mm by 16mm neon flex that gives a smooth, continuous line of light. Choose from three white colour temperatures at 12w per metre, or an RGBW version at 14.4w per metre that adds full colour to a warm white channel.
IP67 rated and dimmable, it suits facades, signage, pool and garden features, bars and outdoor entertaining areas, as well as indoor joinery and feature lines. The white versions offer CRI above 90 for natural colour.
Key features
- White: 12w per metre, 112 LEDs per metre, 635 to 680 lumens per metre
- RGBW: 14.4w per metre, 420 LEDs per metre, 350 lumens per metre on the 3000k white channel
- Top bend
- CRI above 90
- 120° beam angle
- 16mm wide, 16mm high, not including end caps
- Cut points every 83.3mm
- Dimmable, compatible with 0/1 to 10V, DALI, DMX, RF and WiFi control
- 24v DC, maximum length 5 metres
- Supplied with 4 mounting clips per metre
- IP67 rated
- 5 year replacement warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 2700k Extra Warm White |
635 lumens |
Gardens, outdoor living, hospitality |
| 3000k Warm White |
660 lumens |
Handrails, steps, joinery, signage |
| 4000k Cool White |
680 lumens |
Facades, commercial outlines, wayfinding |
| RGBW (colour plus 3000k white) |
350 lumens (3000k channel) |
Feature lighting, bars, events, colour signage |
Choosing a driver and controller
Allow 12w per metre for the white versions, or 14.4w per metre for RGBW, and add about 20% headroom. A full 5 metre run, the maximum length, draws 60w in white, so it needs a 24v driver of at least 72w, which in practice means a 100w driver. In RGBW a 5 metre run draws 72w, so it needs at least 86.4w, again a 100w driver, plus an RGBW controller rated for the full load. For anything longer, split the neon into separate runs and feed each one. To dim the white versions, choose a dimmable 24v driver that matches your control system (0/1 to 10V, DALI, DMX, RF or WiFi). Outdoors, use a weatherproof driver and controller or keep them under cover.
Mounting and outdoor use
Neon flex does not need an aluminium profile. Fix it with the mounting clips supplied, four per metre. This is a top bend neon: the light comes out of the top face and it flexes up and down rather than sideways, so it suits following curved edges, arches and columns rather than tracing shapes flat on a wall. Every cut end must be resealed with an end cap and silicone to keep the IP67 rating, and any outdoor joins should be made in a waterproof connector or junction box.
IP67 rated for outdoor use.
This range is supplied on quotation. Use the enquire for price button with your quantities and products and we will email you a personalised quote.
