240v LED strip, 120 LEDs per metre, IP65
This strip runs straight from mains power, so there is no separate low voltage driver to buy or hide. It comes with a flex and plug, carries 120 chips per metre and can run up to 50 metres, which makes it a practical choice for long outdoor and commercial runs where a 24v strip would need many feed points.
The IP65 sealed body suits eaves, covered outdoor areas, verandahs, carports and long bulkheads. A wide 150° beam spreads the light evenly, and CRI above 90 keeps colours looking natural.
Key features
- 240v, supplied with flex and plug
- 120 chips per metre
- Up to 50 metres maximum length
- CRI above 90 for accurate, natural colour
- Wide 150° beam angle
- 20mm wide, 11mm high including end caps
- Cut points every 100mm
- Supplied with 4 mounting clips per metre
- IP65 rated
- 5 year replacement warranty
Colour temperature and output
| Colour temperature |
Output |
Best for |
| 3000k Warm White |
1180 lumens |
Verandahs, outdoor living, hospitality |
| 4000k Cool White |
1190 lumens |
Carports, commercial walkways, retail |
| 6000k Cool Daylight |
1200 lumens |
Garages, workshops, utility and service areas |
Powering it
The strip is supplied with a flex and plug for connection to mains power, with a maximum length of 50 metres. Only cut it at the marked points every 100mm. Because it carries 240v, any hardwired connection must be installed by a licensed electrician.
Mounting and outdoor use
Fix the strip with the mounting clips supplied, four per metre. Every cut end must be resealed with an end cap to keep the IP65 rating, and any outdoor connections should be made in a waterproof connector or junction box.
IP65 rated, suitable for damp locations and sheltered outdoor areas.
This range is supplied on quotation. Use the enquire for price button with your quantities and products and we will email you a personalised quote.
