* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Corner neon LED strip for 90° edges, IP67 with CRI 90
This Pixel corner neon is a complete lighting line for 90° applications. There is no separate strip, diffuser or profile to assemble: the strip, lens and housing are one silicone extrusion that sits neatly into an internal or external corner and throws an even, dot free wash of light.
It is made for joinery edges, cabinetry, stair details, architectural outlines and indirect corner lighting. With an IP67 rating and UV, yellowing, salt and alkali resistant silicone, it works just as well outdoors as it does inside.
Key features
- One piece silicone corner extrusion, 22.5mm x 10.9mm
- 12w per metre, 696 to 720 lumens per metre
- 240 LEDs per metre for a smooth, dot free line
- CRI 90 for accurate, natural colour
- 110° beam angle
- Plug and play connector tails, no welding needed
- 24v DC, 5 metres from a single feed or 10 metres fed from both ends
- IP67, minimum bend radius 60mm
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 3000k Warm White |
696 lumens |
Joinery, stairs, outdoor living, hospitality |
| 4000k Cool White |
720 lumens |
Commercial edges, retail, workspaces |
Choosing a driver
Allow 12w for every metre and add about 20% headroom. A full 5 metre run draws 60w, so it needs a 24v driver of at least 72w, which in practice means a 100w driver. Fed from both ends, a 10 metre run draws 120w and needs a 150w driver. For anything longer, split it into separate runs and feed each one. The 20 metre roll is supplied as one reel, so plan your runs before cutting. Outdoors, use a weatherproof IP66 or IP67 driver or keep the driver under cover. The strip is dimmable with a dimmable 24v driver and a compatible dimmer.
Mounting and outdoor use
No profile is needed. Fix it with mounting clips spaced every 500mm, or seat it in a mounting channel for the cleanest finish. Keep any bends at a 60mm radius or larger. Every cut end must be resealed with an end cap and silicone to keep the IP67 rating, and outdoor joins should be made in a waterproof connector or junction box.
