* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Tunable white COB LED strip, 14.4w per metre, IP67
This fully sealed CT strip adjusts from warm to cool white, between 3000k and 5500k, and spreads light from 608 COB LEDs per metre into an even, dot free line. It gives you adjustable white light in places a standard strip cannot go.
Use it for outdoor kitchens, alfresco areas, pergolas, wet areas and anywhere you want both functional and ambient light from one run. It is sold per metre or as a 10 metre roll.
Key features
- Adjustable white from 3000k to 5500k
- 608 COB LEDs per metre for a smooth, dot free line
- 14.4w per metre, 800 lumens per metre
- 120° beam angle
- 14mm wide, 4mm high
- 24v DC, maximum 5 metre run
- IP67 rated
- Needs a compatible CT controller
- 3 year warranty
Colour options
| How you run it |
What you need |
Best for |
| Adjustable white, from warm to cool |
24v driver plus a compatible CT controller |
Alfresco areas, outdoor kitchens, pergolas |
| One fixed white of your choice |
24v driver plus a compatible CT controller set to that tone |
Garden walls, steps, wet areas |
Choosing a driver and controller
Allow 14.4w for every metre of strip and add about 20% headroom. A full 5 metre run draws 72w, so it needs a 24v driver of at least 87w, which in practice means a 100w driver. For longer installations, split the strip into runs of 5 metres or less and feed each run separately. Your CT controller must also be rated for the full load of the run. The 10 metre roll is supplied as one reel, so plan your runs before cutting. Outdoors, use a weatherproof IP66 or IP67 driver and keep the controller under cover.
Mounting and heat
This strip must be installed on an aluminium heat dissipating surface for warranty purposes, and an aluminium profile does that job while protecting the strip and extending its life. Choose a profile at least 15mm wide inside to suit the 14mm strip, and add a diffuser for the softest line of light. Every cut end must be resealed with an end cap and silicone to keep the IP67 rating, and any outdoor joins should be made in a waterproof connector or junction box.
IP67 rated for outdoor use.
