* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
IP68 top view neon flex LED strip, 13.5mm square, 3000k or RGB, sold per metre
A compact IP68 neon flex in a 13.5mm square Eco PVC profile. It is built to cope with substantial moisture and knocks, so it can go into pool copings, in pavement channels and exterior walls where lesser strips would fail.
Available in warm 3000k or RGB, both at 10w per metre, and made to order for your run. As with any IP68 product, the final water protection depends on the quality of the cable joins and installation. Made to your specifications, with a lead time of 3 to 4 weeks from order to dispatch.
Key features
- 3000k or RGB, 10w per metre
- 144 LEDs per metre
- Top view, 120° beam angle
- 24v DC constant voltage, PWM compatible
- 10 metres from a single feed or 20 metres fed from both ends
- Bends vertically, minimum bend diameter 80mm
- Cut points every 83.3mm
- 13.5mm wide, 13.5mm high
- Rated to 50,000 hours (L70 at 50°C)
- IP68
- 3 year warranty
Colour temperature and output
| Colour temperature |
Best for |
| 3000k Warm White |
Pool copings, garden walls, facades |
| RGB |
Colour features, pools, entertainment areas |
Choosing a driver and controller
Allow 10w for every metre and add about 20% headroom. A full 10 metre run from a single feed draws 100w, so it needs a 24v driver of at least 120w, which in practice means a 150w driver. Fed from both ends, a 20 metre run draws 200w and needs a 300w driver. For RGB, the controller must be rated for the full load. Split longer installs into separate runs, each with its own feed. Outdoors, use a weatherproof IP66 or IP67 driver and controller or keep them under cover.
Mounting and outdoor use
Neon flex does not need an aluminium profile. Fix it with mounting clips or a mounting channel. This one bends vertically, with a minimum bend diameter of 80mm, so plan curves to suit. Reseal every cut end with an end cap and silicone to keep the IP68 rating, and make any outdoor joins in a waterproof connector or junction box.
IP68 rated for outdoor use, including pool copings and in pavement channels. Operates from minus 20°C to 40°C; install between 5°C and 35°C.
