* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Dotless COB RGB LED strip, 15w per metre, IP67
A fully sealed COB RGB strip that turns out smooth, even colour with no visible dots. The IP67 rating means you can take colour lighting outside, along decks, garden edges, steps and alfresco areas, as well as using it indoors.
Pair it with an RGB controller to pick a colour, set a scene or run colour changes for parties and entertaining. Buy it by the metre or as a 10 metre roll.
Key features
- COB construction for smooth, dot free colour
- Full RGB colour with a compatible RGB controller
- 15w per metre, 500 lumens per metre
- 24v DC, maximum 5 metre run
- IP67 sealed for indoor and outdoor use
- 14mm wide, 6mm high, 3M double sided tape backing
- Sold per metre or as a 10 metre roll
- 3 year warranty
Colour options
| How you run it |
What you need |
Best for |
| Full colour changing |
24v driver plus an RGB controller |
Alfresco areas, decks, entertaining |
| One fixed colour |
24v driver plus an RGB controller set to one colour |
Garden edges, steps, signage |
| White (all channels on) |
24v driver plus an RGB controller |
Background glow when colour is not needed |
Choosing a driver and controller
Allow 15w for every metre of strip and add about 20% headroom. A full 5 metre run draws 75w, so it needs a 24v driver of at least 90w, which in practice means a 100w driver. For longer installations, split the strip into runs of 5 metres or less and feed each run separately. The 10 metre roll is supplied as one reel, so plan your runs before cutting. Your RGB controller must be rated for the full load of the run. In damp or outdoor locations, use a weatherproof IP66 or IP67 driver and controller, or keep them under cover.
Mounting and outdoor use
This strip must be installed on an aluminium heat dissipating surface to keep the warranty valid. The neatest option is an aluminium profile at least 15mm wide inside to suit the 14mm strip. Every cut end must be resealed with an end cap and silicone to keep the IP67 rating, and outdoor joins should be made in a waterproof connector or junction box.
IP67 rated against dust and water immersion, so it can be used outdoors as well as inside.
