* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
COB LED strip, 15w per metre, 12v, daylight white, CRI 80
This 12v COB strip delivers a bright daylight white as one seamless line, with no visible LED dots. It is well suited to workshops, garages, display cabinets and anywhere you want crisp, clear light from a discreet source.
With CRI greater than 80, colours look natural for everyday task and display lighting, and at 15w per metre it is bright enough to light a bench or cabinet properly. It runs on 12v, so it pairs easily with 12v drivers you may already have.
Key features
- COB construction for a seamless line of light
- 15w per metre, 1397 lumens per metre
- CRI greater than 80
- 120° beam angle
- 12v DC, maximum length 5 metres
- Dimmable
- Lamp life greater than 50,000 hours
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 5500k Daylight White |
1397 lumens |
Workshops, garages, display cases, task lighting |
Choosing a driver
Allow 15w for every metre of strip and add about 20% headroom. A full 5 metre run draws 75w, so it needs a 12v driver of at least 90w, which in practice means a 100w driver. For longer installations, split the strip into runs of 5 metres or less and feed each run separately. To dim the strip, pair it with a dimmable 12v driver and a compatible dimmer.
Mounting and heat
An aluminium profile is the best way to install this strip. It draws heat away from the chips, protects the strip and extends its life, and a diffuser gives an even softer finish. Check the strip width against your chosen profile before ordering.
Rated IP20, so it is for dry indoor areas only.
