Wall washer LED strip, 18w per metre, IP67
Wall washer strip is designed to throw light across a surface rather than simply glow. This IP67 version uses 48 chips per metre at 18w per metre, giving 1265 to 1459 lumens per metre to wash facades, feature walls and screens with an even sheet of light.
Being fully sealed, it is equally at home outdoors on building facades, retaining walls, fences and planter boxes as it is indoors on stone or textured feature walls. CRI above 90 brings out the colour and texture of brick, timber, render and foliage.
Key features
- 18w per metre, 1265 to 1459 lumens per metre depending on colour
- 48 chips per metre for wall washing
- CRI above 90 for accurate, natural colour
- 120° beam angle
- 19mm wide, 10mm high
- Cut points every 125mm
- 24v DC, maximum run of 5 metres
- 3M double sided tape for easy installation
- IP67 rated
- 5 year replacement warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 2700k Extra Warm White |
1265 lumens |
Residential facades, gardens, hospitality |
| 3000k Warm White |
1385 lumens |
Feature walls, outdoor living, retaining walls |
| 4000k Cool White |
1430 lumens |
Commercial facades, modern render and concrete |
| 6500k Cool Daylight |
1459 lumens |
Commercial and signage walls, cool toned finishes |
Choosing a driver
Allow 18w for every metre of strip and add about 20% headroom. A full 5 metre run, the maximum length, draws 90w, so it needs a 24v driver of at least 108w, which in practice means a 150w driver. For longer installations, split the strip into runs of 5 metres or less and give each run its own feed. Outdoors or in damp areas, use a weatherproof IP66 or IP67 driver or keep the driver under cover.
Mounting and heat
At 18w per metre this strip produces real heat, so we recommend mounting it in an aluminium profile or on a metal surface that can draw heat away from the chips and extend their life. Choose a profile at least 20mm wide inside to suit the 19mm strip. The 3M double sided tape on the back makes fixing straightforward. For an even wash, set the strip back from the base of the wall rather than tight against it.
If you cut the strip, reseal every cut end with an end cap and silicone to keep the IP67 rating, and make any outdoor joins in a waterproof connector or junction box.
IP67 rated for outdoor use.
This range is supplied on quotation. Use the enquire for price button with your quantities and products and we will email you a personalised quote.
