* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Top bend flexible neon LED strip, 20mm, 18w per metre, white or RGBW, IP67
The largest of these top bend neons, this 20mm by 20mm profile gives a bold, wide line of light that reads clearly from a distance. Every version runs at 18w per metre, with three whites at 735 to 790 lumens per metre or an RGBW option that pairs full colour with a warm white channel.
Its size and output make it a strong choice for building facades, large signage, commercial outlines and big outdoor entertaining spaces. It is IP67 rated, dimmable, and the white versions have CRI above 90.
Key features
- 18w per metre
- White: 112 LEDs per metre, 735 to 790 lumens per metre
- RGBW: 420 LEDs per metre, 570 lumens per metre on the 3000k white channel
- Top bend
- CRI above 90
- 120° beam angle
- 20mm wide, 20mm high, not including end caps
- Cut points every 62.5mm
- Dimmable, compatible with 0/1 to 10V, DALI, DMX, RF and WiFi control
- 24v DC, maximum length 5 metres
- Supplied with 4 mounting clips per metre
- IP67 rated
- 5 year replacement warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 2700k Extra Warm White |
735 lumens |
Residential facades, gardens, hospitality |
| 3000k Warm White |
775 lumens |
Outdoor living, signage, feature outlines |
| 4000k Cool White |
790 lumens |
Commercial facades, wayfinding, retail |
| RGBW (colour plus 3000k white) |
570 lumens (3000k channel) |
Feature lighting, events, colour signage |
Choosing a driver and controller
Allow 18w for every metre and add about 20% headroom. A full 5 metre run, the maximum length, draws 90w, so it needs a 24v driver of at least 108w, which in practice means a 150w driver. For the RGBW version, the RGBW controller must also be rated for the full load. For anything longer, split the neon into separate runs and feed each one. To dim the white versions, choose a dimmable 24v driver that matches your control system (0/1 to 10V, DALI, DMX, RF or WiFi). Outdoors, use a weatherproof driver and controller or keep them under cover.
Mounting and outdoor use
Neon flex does not need an aluminium profile. Fix it with the mounting clips supplied, four per metre. This is a top bend neon: the light comes out of the top face and it flexes up and down rather than sideways, so it suits following curved edges, arches and columns rather than tracing shapes flat on a wall. Every cut end must be resealed with an end cap and silicone to keep the IP67 rating, and any outdoor joins should be made in a waterproof connector or junction box.
IP67 rated for outdoor use.
This range is supplied on quotation. Use the enquire for price button with your quantities and products and we will email you a personalised quote.
