* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Micro LED strip, 4mm wide, 19.2w per metre, 5500k
Bright, clean daylight from a 4mm wide strip. At 19.2w per metre it gives plenty of output for display cases, tool storage and detailed work areas while staying small enough to fit into very slim channels.
The 5500k colour gives crisp visibility in both commercial and residential settings, from retail cabinets to garage workbenches.
Key features
- Only 4mm wide and 2mm high
- 19.2w per metre, 1600 lumens per metre
- 240 LED chips per metre
- CRI greater than 80
- 120° beam angle
- 24v DC, maximum 5 metre run
- Dimmable
- Sold per metre or as a 30 metre roll
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 5500k Daylight |
1600 lumens |
Display cases, workshops, detailed work |
Choosing a driver
Allow 19.2w for every metre of strip and add about 20% headroom. A full 5 metre run draws 96w, so it needs a 24v driver of at least 116w, which in practice means a 150w driver. For longer installations, split the strip into runs of 5 metres or less and feed each run separately. The 30 metre roll is supplied as one reel, so plan your runs before cutting. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and heat
This strip must be installed on an aluminium heat dissipating surface to keep the warranty valid. At 19.2w per metre on a 4mm board it needs that heat path, so an aluminium profile at least 5mm wide inside is the best option, with a diffuser for a softer line.
IP20 rated for dry indoor locations only.
