* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Dotless COB RGB plus white LED strip, 20w per metre, IP54
This COB strip adds a dedicated white channel to full RGB colour, so you can switch between colour effects and a usable white light from the one run. The COB construction blends everything into a smooth, dot free line. Choose the RGBC or RGBW version to suit your design.
With an IP54 rating against dust and splashes, it suits cabinetry, entertainment areas, bathrooms and feature walls in damp or sheltered spaces.
Key features
- COB construction for a smooth, dot free line
- RGB colour plus a white channel, RGBC or RGBW versions
- 20w per metre, 500 lumens per metre
- CRI greater than 80
- 120° beam angle
- 24v DC, maximum 5 metre run
- Dimmable with an RGBC or RGBW controller
- IP54 for damp and sheltered locations
- 12mm wide, 3mm high, double sided tape backing
- Sold per metre or as a 10 metre roll
- 3 year warranty
Colour options
| How you run it |
What you need |
Best for |
| Full colour changing |
24v driver plus an RGBC or RGBW controller |
Feature walls, entertainment areas, bars |
| White channel on its own |
24v driver plus an RGBC or RGBW controller |
Everyday ambient light |
| Colour and white mixed |
24v driver plus an RGBC or RGBW controller |
Softer tones and mood lighting |
Choosing a driver and controller
Allow 20w for every metre of strip and add about 20% headroom. A full 5 metre run draws 100w, so it needs a 24v driver of at least 120w, which in practice means a 150w driver. For longer installations, split the strip into runs of 5 metres or less and feed each run separately. The 10 metre roll is supplied as one reel, so plan your runs before cutting. Your RGBC or RGBW controller handles colour and dimming, and it must be rated for the full load of the run. In damp or outdoor locations, use a weatherproof IP66 or IP67 driver and controller, or keep them under cover.
Mounting and heat
This strip must be installed on an aluminium heat dissipating surface to keep the warranty valid. An aluminium profile at least 13mm wide inside suits the 12mm strip, protects it and extends its life. Seal any cut ends to keep the IP54 protection.
IP54 rated for damp and sheltered locations, such as bathrooms and covered entertaining areas.
