* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Dotless COB RGB plus white LED strip, 20w per metre, IP67
A sealed COB strip that gives you RGB colour plus a separate white channel, with no visible dots in the line. Available as RGBC or RGBW, it lets you go from party colours to a practical white light without a second strip.
The IP67 rating makes it suitable inside and outside, so it can light alfresco areas, decks, pool surrounds and garden structures as well as interior features.
Key features
- COB construction for a smooth, dot free line
- RGB colour plus a white channel, RGBC or RGBW versions
- 20w per metre, 500 lumens per metre
- 24v DC, maximum 5 metre run
- IP67 sealed for indoor and outdoor use
- 16mm wide, 6mm high, double sided tape backing
- Sold per metre or as a 10 metre roll
- 3 year warranty
Colour options
| How you run it |
What you need |
Best for |
| Full colour changing |
24v driver plus an RGBC or RGBW controller |
Feature walls, entertainment areas, bars |
| White channel on its own |
24v driver plus an RGBC or RGBW controller |
Everyday ambient light |
| Colour and white mixed |
24v driver plus an RGBC or RGBW controller |
Softer tones and mood lighting |
Choosing a driver and controller
Allow 20w for every metre of strip and add about 20% headroom. A full 5 metre run draws 100w, so it needs a 24v driver of at least 120w, which in practice means a 150w driver. For longer installations, split the strip into runs of 5 metres or less and feed each run separately. The 10 metre roll is supplied as one reel, so plan your runs before cutting. Your RGBC or RGBW controller must be rated for the full load of the run. In damp or outdoor locations, use a weatherproof IP66 or IP67 driver and controller, or keep them under cover.
Mounting and outdoor use
This strip must be installed on an aluminium heat dissipating surface to keep the warranty valid, so use an aluminium profile at least 17mm wide inside for the 16mm strip. Reseal every cut end with an end cap and silicone to keep the IP67 rating, and make outdoor joins in a waterproof connector or junction box.
IP67 rated against dust and water immersion, suitable for indoor and outdoor use.
