* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Dotless COB RGBCW LED strip, 20w per metre, IP54
Full RGB colour plus white channels, all blended by the COB construction into a continuous dot free line. One run can give you vivid colour for entertaining and a balanced white light for everyday use.
Its IP54 rating guards against dust and splashes, so it suits feature walls, cabinetry, bathrooms and sheltered entertainment areas.
Key features
- COB construction for a continuous, dot free line
- RGB colour plus white channels (RGBCW)
- 20w per metre, 500 lumens per metre
- CRI greater than 80
- 120° beam angle
- 24v DC, maximum 5 metre run
- Dimmable with an RGBCW controller
- IP54 for damp and sheltered locations
- 12mm wide, 3mm high, double sided tape backing
- 3 year warranty
Colour options
| How you run it |
What you need |
Best for |
| Full colour changing |
24v driver plus an RGBCW controller |
Feature walls, entertainment areas, mood lighting |
| White channels on |
24v driver plus an RGBCW controller |
Balanced everyday light |
| Colour and white mixed |
24v driver plus an RGBCW controller |
Softer tones, scenes and parties |
Choosing a driver and controller
Allow 20w for every metre of strip and add about 20% headroom. A full 5 metre run draws 100w, so it needs a 24v driver of at least 120w, which in practice means a 150w driver. For longer installations, split the strip into runs of 5 metres or less and feed each run separately. Your RGBCW controller handles colour and dimming, and it must be rated for the full load of the run. In damp or outdoor locations, use a weatherproof IP66 or IP67 driver and controller, or keep them under cover.
Mounting and heat
This strip must be installed on an aluminium heat dissipating surface to keep the warranty valid. An aluminium profile at least 13mm wide inside suits the 12mm strip and protects it, and a diffuser smooths the light further. Seal any cut ends to keep the IP54 protection.
IP54 rated for damp and sheltered locations.
