* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Dotless COB RGBCW LED strip, 20w per metre, IP67
This sealed COB strip gives you full colour plus white that can be tuned from warm to cool, all in one smooth, dot free line. It is the one strip to choose when you want both a practical white and colour effects outside.
IP67 protection against moisture and dust means it can go on decks, pergolas, alfresco ceilings and garden features, as well as indoors. Buy it by the metre or as a 10 metre roll.
Key features
- COB construction for a smooth, dot free line
- RGB colour plus warm to cool white tuning
- 20w per metre, 500 lumens per metre
- 24v DC
- IP67 sealed for indoor and outdoor use
- 16mm wide, 6mm high, double sided tape backing
- Sold per metre or as a 10 metre roll
- 3 year warranty
Colour options
| How you run it |
What you need |
Best for |
| Full colour changing |
24v driver plus an RGBCW controller |
Feature walls, entertainment areas, mood lighting |
| Tunable white, warm to cool |
24v driver plus an RGBCW controller |
Living areas, kitchens, everyday lighting |
| Colour and white mixed |
24v driver plus an RGBCW controller |
Softer tones, scenes and parties |
Choosing a driver and controller
No maximum run length is published for this strip, so size the driver by load: allow 20w for every metre and add about 20% headroom. As a worked example, a 5 metre run draws 100w and needs a 24v driver of at least 120w, which in practice means a 150w driver. Split longer installs into separate runs, each with its own feed. The 10 metre roll is supplied as one reel, so plan your runs before cutting. Your RGBCW controller must be rated for the full load of the run. In damp or outdoor locations, use a weatherproof IP66 or IP67 driver and controller, or keep them under cover.
Mounting and outdoor use
This strip must be installed on an aluminium heat dissipating surface to keep the warranty valid, so use an aluminium profile at least 17mm wide inside for the 16mm strip. Reseal every cut end with an end cap and silicone to keep the IP67 rating, and keep outdoor joins in a waterproof connector or junction box.
IP67 rated for outdoor use and wet areas.
