* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Side bend neon LED strip, 7.2w per metre, IP67
This slim HaviFlex neon is only 4mm wide, and it bends sideways, across its width, so it can follow curves and shapes laid flat along a wall, ceiling or panel. The silicone body turns the LEDs into one continuous line of light, which makes it ideal for lettering, logos, outlines and fine architectural details.
Sealed to IP67, it handles outdoor and wet area installs as comfortably as indoor feature lighting. CRI above 90 keeps surfaces looking natural, and it supports a wide range of dimming systems for hospitality and retail fitouts.
Key features
- Bends sideways for curves and shapes on a flat surface
- Slim 4mm x 10mm profile (not including end caps)
- 7.2w per metre, 260 to 269 lumens per metre
- 168 LEDs per metre
- CRI above 90 for natural colour
- 120° beam angle
- 24v DC, maximum 5 metre run
- Dimmable, compatible with 0/1 to 10V, DALI, DMX, RF and WiFi dimming
- Supplied with 4 mounting clips per metre
- IP67
- 5 year replacement warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 2700k Extra Warm White |
260 lumens |
Gardens, outdoor living, restaurants and bars |
| 3000k Warm White |
269 lumens |
Outdoor living, alfresco areas, hospitality |
| 4000k Cool White |
269 lumens |
Facades, pathways, commercial outlines |
Choosing a driver
Allow 7.2w for every metre and add about 20% headroom. A full 5 metre run draws 36w, so it needs a 24v driver of at least 43w, which in practice means a 60w driver. For longer installs, split the neon into runs of 5 metres or less and feed each one. Outdoors or in damp areas, use a weatherproof IP66 or IP67 driver or keep the driver under cover. To dim it, choose a dimmable 24v driver to suit your dimming system and a compatible dimmer or controller.
Mounting and outdoor use
Neon flex does not need an aluminium profile. Fix it with the supplied mounting clips or a mounting channel, and remember it bends sideways only, so plan shapes that lie flat against the mounting surface. Every cut end must be resealed with an end cap and silicone to keep the IP67 rating, and any outdoor joins should be made in a waterproof connector or junction box.
IP67 rated for outdoor use.
This range is supplied on quotation. Hit the enquire for price button with your quantities and we will email you a personalised quote.
