* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Top bend neon LED strip, 6mm, 7.2w per metre, IP67
This compact 6mm square HaviFlex neon bends over its top face, so it can wrap around corners, run up and over steps and follow curved edges while the light still faces outward. With 280 LEDs per metre behind a silicone diffuser, it gives a smooth, continuous glow rather than a dotted line.
It is small enough to tuck into joinery, handrails, shelf edges and signage, and IP67 sealing means it is just as happy outdoors on garden features, pergolas and pool surrounds. CRI above 90 and broad dimming support make it a versatile choice for both homes and venues.
Key features
- Bends over the top for corners, steps and curved edges
- Compact 6mm x 6mm profile (not including end caps)
- 7.2w per metre, 400 to 440 lumens per metre
- 280 LEDs per metre for a smooth glow
- CRI above 90 for natural colour
- 120° beam angle
- Cut points every 25mm
- 24v DC, maximum 5 metre run
- Dimmable, compatible with 0/1 to 10V, DALI, DMX, RF and WiFi dimming
- Supplied with 4 mounting clips per metre
- IP67
- 5 year replacement warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 2700k Extra Warm White |
400 lumens |
Gardens, outdoor living, restaurants and bars |
| 3000k Warm White |
400 lumens |
Outdoor living, alfresco areas, hospitality |
| 4000k Cool White |
440 lumens |
Facades, pathways, commercial outlines |
Choosing a driver
Allow 7.2w for every metre and add about 20% headroom. A full 5 metre run draws 36w, which calls for a 24v driver of at least 43w, so a 60w driver in practice. Split longer installs into runs of 5 metres or less, each with its own feed. Outdoors or in damp areas, use a weatherproof IP66 or IP67 driver or keep the driver under cover. For dimming, use a dimmable 24v driver that matches your dimming system and a compatible dimmer or controller.
Mounting and outdoor use
No aluminium profile is needed. Fix the neon with the supplied mounting clips or a mounting channel, bending it over its top face only. Reseal every cut end with an end cap and silicone to keep the IP67 rating, and make any outdoor joins in a waterproof connector or junction box.
IP67 rated for outdoor use.
This range is supplied on quotation. Hit the enquire for price button with your quantities and we will email you a personalised quote.
