* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Top bend neon LED strip, 10mm, 7.2w per metre, IP67
A 10mm square HaviFlex neon that bends over its top face, giving a bolder line of light than the slimmer sizes while still wrapping neatly around corners, arches and curved joinery. The silicone body blends the LEDs into a continuous glow with no separate diffuser needed.
One feed can run up to 10 metres, which keeps cabling simple on longer outlines such as facades, bar fronts, pergolas and garden walls. It is IP67 sealed for outdoor use, with CRI above 90 and support for most common dimming systems.
Key features
- Bends over the top for corners, arches and curves
- 10mm x 10mm profile (not including end caps)
- 7.2w per metre, 435 to 485 lumens per metre
- 168 LEDs per metre
- CRI above 90 for natural colour
- 120° beam angle
- 24v DC, maximum 10 metre run
- Dimmable, compatible with 0/1 to 10V, DALI, DMX, RF and WiFi dimming
- Supplied with 4 mounting clips per metre
- IP67
- 5 year replacement warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 2700k Extra Warm White |
435 lumens |
Gardens, outdoor living, restaurants and bars |
| 3000k Warm White |
435 lumens |
Outdoor living, alfresco areas, hospitality |
| 4000k Cool White |
485 lumens |
Facades, pathways, commercial outlines |
Choosing a driver
Allow 7.2w for every metre and add about 20% headroom. A full 10 metre run draws 72w, so it needs a 24v driver of at least 87w, which in practice means a 100w driver. A 5 metre run draws 36w and suits a 60w driver. For anything over 10 metres, split the neon into separate runs and feed each one. Outdoors or in damp areas, use a weatherproof IP66 or IP67 driver or keep the driver under cover. To dim it, pair it with a dimmable 24v driver for your dimming system and a compatible dimmer or controller.
Mounting and outdoor use
Neon flex does not need an aluminium profile. Use the supplied mounting clips or a mounting channel, and bend it over its top face only. Every cut end must be resealed with an end cap and silicone to keep the IP67 rating, and outdoor joins belong in a waterproof connector or junction box.
IP67 rated for outdoor use.
This range is supplied on quotation. Hit the enquire for price button with your quantities and we will email you a personalised quote.
