* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Dotless COB LED strip, 3000k, IP67
A warm white COB strip sealed to IP67, giving a smooth, unbroken line of light both inside and outside the house. With 320 chips per metre and no visible dots, it looks clean even without a diffuser.
Use it under alfresco benches, along garden steps and outdoor shelving, or indoors in living rooms, bedrooms and feature joinery. It is sold by the metre or as a 10 metre roll.
Key features
- 320 COB chips per metre for a smooth, dot free line
- 9.6w per metre, 820 lumens per metre
- CRI above 90 for accurate, natural colour
- 120° beam angle
- 12mm wide, 4mm high
- 24v DC, maximum 5 metre run, dimmable
- IP67 rated
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 3000k Warm White |
820 lumens |
Alfresco areas, living spaces, feature lighting |
Choosing a driver
Allow 9.6w for every metre of strip and add about 20% headroom. A full 5 metre run draws 48w, so it needs a 24v driver of at least 58w, which in practice means a 60w driver. For longer installations, split the strip into runs of 5 metres or less and feed each run separately. The 10 metre roll is supplied as one reel, so plan your runs before cutting. In damp or outdoor locations, use a weatherproof IP66 or IP67 driver or keep the driver under cover. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and heat
To keep the warranty valid, this strip must be mounted on an aluminium surface that draws heat away from the LEDs, and an aluminium profile is the simplest way to do it. The profile also protects the strip and extends its life, and a diffuser gives the softest line of light. Choose a profile at least 13mm wide inside to suit the 12mm strip. If you cut the strip, reseal every cut end with an end cap and silicone to keep the IP67 rating, and make any outdoor joins in a waterproof connector or junction box.
IP67 rated for outdoor use and wet locations.
