* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Dotless COB LED strip, 4000k, IP54
Neutral 4000k light in a seamless COB strip. The 320 chips per metre blend into one even glow, so cabinets, shelves and displays get clean light without a dotted reflection on gloss surfaces.
Its slim 8mm width tucks discreetly into kitchens, offices, wardrobes and retail fitouts, and IP54 protection lets it go into bathrooms and sheltered spots too. Available per metre or on a 10 metre roll.
Key features
- 320 COB chips per metre for a smooth, dot free line
- 9.6w per metre, 810 lumens per metre
- CRI above 90 for accurate, natural colour
- 120° beam angle
- 8mm wide, 3mm high
- 24v DC, maximum 5 metre run, dimmable
- IP54 rated
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 4000k Cool White |
810 lumens |
Kitchens, workspaces, displays |
Choosing a driver
Allow 9.6w for every metre of strip and add about 20% headroom. A full 5 metre run draws 48w, so it needs a 24v driver of at least 58w, which in practice means a 60w driver. For longer installations, split the strip into runs of 5 metres or less and feed each run separately. The 10 metre roll is supplied as one reel, so plan your runs before cutting. In damp or outdoor locations, use a weatherproof IP66 or IP67 driver or keep the driver under cover. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and heat
To keep the warranty valid, this strip must be mounted on an aluminium surface that draws heat away from the LEDs, and an aluminium profile is the simplest way to do it. The profile also protects the strip and extends its life, and a diffuser gives the softest line of light. Choose a profile at least 9mm wide inside to suit the 8mm strip. In damp areas, seal cut ends with an end cap and keep joins inside a protected connector or junction box.
IP54 rated, suitable for damp or sheltered locations as well as indoors.
