* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Side bend neon LED strip, 9.6w per metre, IP67
This HaviFlex neon bends sideways, across its 6mm width, so it can be shaped into curves, script and outlines that sit flat against a wall, ceiling or sign board. The silicone body hides the individual LEDs completely, leaving a clean, continuous line that reads like traditional neon.
At 9.6w per metre it is a step brighter than the slimmest neon, which suits signage, hospitality features and exterior outlines. It is sealed to IP67 for outdoor use and supports most common dimming systems.
Key features
- Bends sideways for curves and shapes on a flat surface
- 6mm x 12mm profile (not including end caps)
- 9.6w per metre, 280 to 290 lumens per metre
- CRI above 90 for natural colour
- 120° beam angle
- Cut points every 25mm
- 24v DC, maximum 5 metre run
- Dimmable, compatible with 0/1 to 10V, DALI, DMX, RF and WiFi dimming
- Supplied with 4 mounting clips per metre
- IP67
- 5 year replacement warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 2700k Extra Warm White |
280 lumens |
Gardens, outdoor living, restaurants and bars |
| 3000k Warm White |
285 lumens |
Outdoor living, alfresco areas, hospitality |
| 4000k Cool White |
290 lumens |
Facades, pathways, commercial outlines |
Choosing a driver
Allow 9.6w for every metre and add about 20% headroom. A full 5 metre run draws 48w, so it needs a 24v driver of at least 58w, which in practice means a 60w driver. For longer installs, split the neon into runs of 5 metres or less and feed each one. Outdoors or in damp areas, use a weatherproof IP66 or IP67 driver or keep the driver under cover. To dim it, use a dimmable 24v driver suited to your dimming system and a compatible dimmer or controller.
Mounting and outdoor use
Neon flex does not need an aluminium profile. Fix it with the supplied mounting clips or a mounting channel, remembering that it bends sideways only, so shapes should lie flat on the mounting surface. Reseal every cut end with an end cap and silicone to keep the IP67 rating, and make any outdoor joins in a waterproof connector or junction box.
IP67 rated for outdoor use.
This range is supplied on quotation. Hit the enquire for price button with your quantities and we will email you a personalised quote.
