* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Top bend neon LED strip, 16mm, 9.6w per metre, IP67
The largest and brightest of the top bend HaviFlex neon, this 16mm wide profile delivers up to 820 lumens per metre in a broad, even band of light. It bends over its top face, so it can wrap around corners, arches and curved bulkheads while the light keeps facing out into the room or onto the street.
A single feed covers up to 10 metres, which helps on long facades, building outlines, bar fronts and pergolas. IP67 sealing, CRI above 90 and wide dimming support make it equally at home on a commercial exterior or a feature wall at home.
Key features
- Bends over the top for corners, arches and curves
- 16mm x 15mm profile (not including end caps)
- 9.6w per metre, 780 to 820 lumens per metre
- 140 LEDs per metre
- CRI above 90 for natural colour
- 120° beam angle
- Cut points every 50mm
- 24v DC, maximum 10 metre run
- Dimmable, compatible with 0/1 to 10V, DALI, DMX, RF and WiFi dimming
- Supplied with 4 mounting clips per metre
- IP67
- 5 year replacement warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 2700k Extra Warm White |
780 lumens |
Gardens, outdoor living, restaurants and bars |
| 3000k Warm White |
820 lumens |
Outdoor living, alfresco areas, hospitality |
| 4000k Cool White |
810 lumens |
Facades, pathways, commercial outlines |
Choosing a driver
Allow 9.6w for every metre and add about 20% headroom. A full 10 metre run draws 96w, so it needs a 24v driver of at least 116w, which in practice means a 150w driver. A 5 metre run draws 48w and suits a 60w driver. For anything over 10 metres, split the neon into separate runs and feed each one. Outdoors or in damp areas, use a weatherproof IP66 or IP67 driver or keep the driver under cover. To dim it, pair it with a dimmable 24v driver for your dimming system and a compatible dimmer or controller.
Mounting and outdoor use
No aluminium profile is needed. Fix the neon with the supplied mounting clips or a mounting channel, bending it over its top face only. Every cut end must be resealed with an end cap and silicone to keep the IP67 rating, and outdoor joins should be made in a waterproof connector or junction box.
IP67 rated for outdoor use.
This range is supplied on quotation. Hit the enquire for price button with your quantities and we will email you a personalised quote.
