The 90mm Polly LED Downlight is a reliable and versatile recessed lighting solution designed for both residential and commercial interiors. Its fixed design and wide beam angle provide even, comfortable illumination across the space. Built with a durable polycarbonate finish, it is well suited for everyday use, including areas where moisture protection is required. With TRI colour selection and dimming compatibility on the 240V model, it offers flexible lighting control to suit different environments and preferences.
24v DC Model must be used with a compatible 24v DC LED Driver
Choosing a driver
The 24v DC version runs on low voltage and needs a 24v LED driver, installed by a licensed electrician. The 240v version wires straight to mains and does not need a driver.
Allow 8w for each downlight and add about 20% headroom. 6 downlights draw 48w, so they need a 24v driver of at least 58w, which in practice means a 60w driver.
| 24v driver size |
Maximum downlights |
| 30w |
3 |
| 60w |
6 |
| 100w |
10 |
| 150w |
15 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with our voltage drop calculator.
Indoors, an indoor 24v driver mounted in the ceiling space works well. If the light is going outdoors or under eaves, use a weatherproof IP66 24v driver.
To dim, pair it with a dimmable 24v driver and a compatible dimmer.
💡 Not sure how many you need? Try our free downlight calculator to work out quantity and spacing for your room.