- Bollard Light With Spike
- Solid Brass With Antique Brass Finish
- 225mm Spike Length
- 1m Reinforced Cable
- IP rating: IP54
- Input Voltage: 12V DC
- 3.2w G4 LED Globe
- 3 Years Replacement Warranty
Must be used with suitable 12v DC LED driver
| Part Number |
Colour Temperature
|
Lumens
|
| HV1454T |
3000k
4000k
5500k
|
240lm
250lm
260lm
|
Choosing a driver
This spike light runs on 12v DC, so it needs a 12v LED driver (sometimes called a transformer). It cannot connect straight to 240v mains. The driver is wired in by a licensed electrician.
Allow 3.2w for each spike light and add about 20% headroom. 10 spike lights draw 32w, so they need a 12v driver of at least 39w, which in practice means a 60w driver.
| 12v driver size |
Maximum spike lights |
| 30w |
7 |
| 60w |
15 |
| 100w |
26 |
| 150w |
39 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with the voltage drop calculator below.
Outdoors, use a weatherproof IP66 12v driver and mount it above ground, clear of garden beds and pooling water.
Planning your install? Use our voltage drop calculator to choose the right cable size for your run and keep every light at full brightness.
