* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Neon flex LED strip, 20mm high, IP65, white or RGBW
A taller 12mm by 20mm neon profile for bolder lines of light. This Aqualux neon flex is extruded in one piece and finished with IP65 overmoulded cable entries, giving a smooth glow that stands up to damp and sheltered outdoor spots.
Run it at 10w or 15w per metre in five whites from 2000k to 5000k, or choose the RGBW version for colour plus a dedicated white. It suits facade details, garden walls, steps, signage and feature outlines.
Key features
- 10w or 15w per metre in white, 15w per metre in RGBW
- 270 to 450 lumens per metre in white
- 120° beam angle
- 24v DC constant voltage; PWM and DMX compatible
- Bends horizontally, minimum bend diameter 120mm
- Cut points every 50mm or 71.4mm depending on version
- 12mm wide, 20mm high
- Rated to 70,000 hours (L70 at 25°C)
- IP65
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 2000k |
270 lumens at 10w, 350 lumens at 15w |
Hospitality, very warm accents |
| 2700k |
300 lumens at 10w, 375 lumens at 15w |
Living areas, steps, outdoor living |
| 3000k Warm White |
330 lumens at 10w, 380 lumens at 15w |
Garden walls, coves, joinery |
| 4000k Cool White |
340 lumens at 10w, 445 lumens at 15w |
Facades, retail, wayfinding |
| 5000k |
345 lumens at 10w, 450 lumens at 15w |
Signage, commercial outlines |
| RGBW |
300 lumens at 15w |
Colour features plus a true white |
Choosing a driver and controller
Multiply watts per metre by the run length and add about 20% headroom. At 10w per metre you can run 10 metres from a single feed (100w, so a 150w driver) or 20 metres fed from both ends (200w, so a 300w driver). At 15w per metre, including RGBW, the limit is 7 metres from a single feed (105w, so a 150w driver) or 14 metres fed from both ends (210w, so a 300w driver). Use a 24v driver and split longer installs into separate runs, each with its own feed. For RGBW, the controller must be rated for the full load. To dim the whites, use a dimmable 24v driver and a compatible dimmer. Outdoors, use a weatherproof IP66 or IP67 driver or keep it under cover.
Mounting and outdoor use
Neon flex does not need an aluminium profile. Fix it with mounting clips or a mounting channel. This one bends horizontally, with a minimum bend diameter of 120mm, so plan curves to suit. Reseal every cut end with an end cap and silicone to keep the IP65 rating, and make any outdoor joins in a waterproof connector or junction box.
IP65 rated, suitable for damp and sheltered locations. Operating range minus 20°C to 40°C; install between 5°C and 35°C.
