The Drique LED Bollard Spike Light RGBCW offers a sleek and versatile lighting solution for modern outdoor spaces. Made from durable aluminium with a poly powder-coated black finish, it provides a stylish yet robust fixture ideal for gardens, pathways, and landscape accents. Designed to be added to the 5-light Drique Kit, this model features RGB + CW (cool to warm white) lighting for fully customisable ambience. With interchangeable short and long Perspex lenses, you can easily adjust the light effect to suit your setting.
Must be used with suitable 24v DC LED driver. Must be used with a suitable RGBCW Controller.
Choosing a driver
This spike light runs on 24v DC, so it needs a 24v LED driver (sometimes called a transformer). It cannot connect straight to 240v mains. The driver is wired in by a licensed electrician.
Allow 1w for each spike light and add about 20% headroom. 10 spike lights draw 10w, so they need a 24v driver of at least 12w, which in practice means a 30w driver.
| 24v driver size |
Maximum spike lights |
| 30w |
25 |
| 60w |
50 |
| 100w |
83 |
| 150w |
125 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with the voltage drop calculator below.
Outdoors, use a weatherproof IP66 24v driver and mount it above ground, clear of garden beds and pooling water.
To dim, pair it with a dimmable 24v driver and a compatible dimmer.
Planning your install? Use our voltage drop calculator to choose the right cable size for your run and keep every light at full brightness.
