* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
LED strip, 19.2w per metre, 3000k, IP20, 14mm wide
A wider 14mm board carrying 240 SMD 3528 LEDs per metre, giving an even, warm white light with plenty of output for cabinetry, coves and feature details. It cuts every 50mm for neat custom lengths.
Choose it for living areas, hospitality fitouts and architectural accents where a warm, welcoming tone matters. It comes by the metre or as a 30 metre roll.
Key features
- 19.2w per metre, 1560 lumens per metre
- 240 SMD 3528 LEDs per metre
- CRI greater than 80
- 120° beam angle
- Cut points every 50mm
- 24v DC
- Dimmable
- 14mm wide, 2mm high, 3M double sided tape backing
- Sold per metre or as a 30 metre roll
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 3000k Warm White |
1560 lumens |
Living areas, hospitality, cabinetry |
Choosing a driver
No maximum run length is published for this strip, so size the driver by load: allow 19.2w for every metre and add about 20% headroom. As a worked example, a 5 metre run draws 96w and needs a 24v driver of at least 116w, which in practice means a 150w driver. Split longer installs into separate runs, each with its own feed. The 30 metre roll is supplied as one reel, so plan your runs before cutting. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and heat
An aluminium profile is the recommended way to mount this strip. It protects the strip, draws heat away and extends its life, and a diffuser smooths the line. Choose a profile at least 15mm wide inside to suit the 14mm strip.
IP20 rated for dry indoor locations only.
