* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
LED strip, 19.2w per metre, 4000k, IP20
A bright indoor strip with 240 SMD 3528 LEDs per metre, giving a smooth, consistent line of neutral white. Cut points every 25mm make it easy to fit accurately into joinery and detailed layouts.
4000k suits kitchens, workspaces, commercial joinery and architectural detailing where you want clear light that is neither too warm nor too blue.
Key features
- 19.2w per metre, 1640 lumens per metre
- 240 SMD 3528 LEDs per metre
- CRI greater than 80
- 120° beam angle
- Cut points every 25mm
- 24v DC
- Dimmable
- 10mm wide, 2mm high, 3M double sided tape backing
- Sold per metre or as a 30 metre roll
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 4000k Cool White |
1640 lumens |
Kitchens, workspaces, joinery, retail |
Choosing a driver
No maximum run length is published for this strip, so size the driver by load: allow 19.2w for every metre and add about 20% headroom. As a worked example, a 5 metre run draws 96w and needs a 24v driver of at least 116w, which in practice means a 150w driver. Split longer installs into separate runs, each with its own feed. The 30 metre roll is supplied as one reel, so plan your runs before cutting. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and heat
This strip must be installed on an aluminium heat dissipating surface to keep the warranty valid. An aluminium profile is the simplest way to do this: it protects the strip, draws heat away and extends its life, and a diffuser gives the softest line. Choose a profile at least 11mm wide inside to suit the 10mm strip.
IP20 rated for dry indoor locations only.
