* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
High output LED strip, 32.6w per metre, 5500k daylight
Crisp 5500k daylight and 4075 lumens per metre make this strip a go to for task lighting and any space where clear, bright visibility matters. 168 LEDs per metre spread the output evenly along the 19mm tape.
It works well in workshops, garages, display areas, commercial kitchens and retail, and anywhere you want a clean, white look. Order it cut to length or as a 20 metre roll for long or repeated runs.
Key features
- 32.6w per metre, 4075 lumens per metre
- 168 x 2835 LEDs per metre
- CRI above 80
- 120° beam angle
- 19mm wide, 2mm high
- Cut points every 83mm
- 24v DC
- Dimmable
- 3M double sided tape backing
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 5500k Daylight |
4075 lumens |
Workshops, garages, display and task lighting |
Choosing a driver
Allow 32.6w for every metre of strip and add about 20% headroom. A 5 metre run draws 163w, so it needs a 24v driver of at least 196w, which in practice means a 200w driver. No maximum run length is published for this strip, so split longer installs into separate runs, each with its own feed. The 20 metre roll is supplied as one reel, so plan your runs before cutting. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and heat
This strip draws 32.6w per metre and produces real heat, so mount it in an aluminium profile. The aluminium carries heat away from the LEDs, protects the strip and extends its life, and a diffuser takes the edge off the brightness. Choose a profile at least 20mm wide inside to suit the 19mm strip.
IP20 rated for dry indoor locations only.
