* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
LED strip, 24w per metre, 12v, 4000k, IP20
A high output 12v strip that puts 24w into every metre for a bright, clean neutral white. 120 SMD 2835 chips per metre give smooth, consistent light, and 25mm cut points make custom lengths easy.
It is strong enough to act as a main light source in kitchens, workspaces and general indoor areas rather than just an accent. Buy it by the metre or as a 30 metre roll.
Key features
- 24w per metre, 2040 lumens per metre
- 120 LED chips per metre
- CRI greater than 80
- 120° beam angle
- Cut points every 25mm
- 12v DC
- Dimmable
- 10mm wide, 2mm high, peel and stick backing
- Sold per metre or as a 30 metre roll
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 4000k Cool White |
2040 lumens |
Kitchens, workspaces, general lighting |
Choosing a driver
No maximum run length is published for this strip, so size the driver by load: allow 24w for every metre and add about 20% headroom. As a worked example, a 5 metre run draws 120w and needs a 12v driver of at least 144w, which in practice means a 150w driver. Split longer installs into separate runs, each with its own feed. The 30 metre roll is supplied as one reel, so plan your runs before cutting. To dim the strip, pair it with a dimmable 12v driver and a compatible dimmer.
Mounting and heat
This strip must be installed on an aluminium heat dissipating surface to keep the warranty valid, and at 24w per metre that heat path matters. An aluminium profile at least 11mm wide inside suits the 10mm strip, protects it and extends its life, and a diffuser gives a softer line.
IP20 rated for dry indoor locations only.
