* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Very high output LED strip, 46w per metre, 5500k daylight
A powerful strip for high brightness jobs, delivering 4600 lumens per metre of crisp 5500k daylight from 252 LEDs per metre. The wide 39mm tape spreads that output across a broad band of light.
It suits commercial and retail display lighting, workshops, garages and task areas where bright, clear light is the priority. Buy it per metre or as a full 5 metre roll.
Key features
- 46w per metre, 4600 lumens per metre
- 252 x 2835 LEDs per metre
- CRI above 80
- 120° beam angle
- 39mm wide, 2mm high
- Cut points every 83mm
- 24v DC
- Dimmable
- 3M double sided tape backing
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 5500k Daylight |
4600 lumens |
Retail displays, workshops, garages, task lighting |
Choosing a driver
Allow 46w for every metre of strip and add about 20% headroom. A 5 metre run draws 230w, so it needs a 24v driver of at least 276w, which in practice means a 300w driver. No maximum run length is published for this strip, so split longer installs into separate runs, each with its own feed. The 5 metre roll is supplied as one reel, so plan your runs before cutting. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and heat
This strip draws 46w per metre, so heat management matters. Mount it in an aluminium profile or on an aluminium heat sink to draw heat away from the LEDs, protect the strip and extend its life, and add a diffuser to soften the output. Choose a profile at least 40mm wide inside to suit the 39mm strip.
IP20 rated for dry indoor locations only.
