* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
High output LED strip, 14.4w per metre, 5500k, CRI 90
This daylight strip delivers 1700 lumens per metre of crisp white light from 80 high output LEDs per metre. With CRI over 90, colours stay accurate, which matters in work areas and displays.
Use it for task lighting in garages and workshops, commercial interiors and retail displays. The slim 10mm x 2mm strip fixes with 3M tape and cuts every 125mm for custom lengths.
Key features
- 14.4w per metre, 1700 lumens per metre
- 80 high output 2835 LEDs per metre
- 5500k bright daylight, CRI over 90
- 120° beam angle
- 10mm wide, 2mm high
- Cut points every 125mm
- 24v DC, dimmable
- 3M double sided adhesive backing
- Sold per metre or as a 30 metre roll
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 5500k Bright Daylight |
1700 lumens |
Garages, workshops, task lighting, display |
Choosing a driver
Allow 14.4w for every metre of strip and add about 20% headroom. As a worked example, a 5 metre run draws 72w, so it needs a 24v driver of at least 87w, which in practice means a 100w driver. For bigger installs, split the strip into separate runs, each with its own feed. The 30 metre roll is supplied as one reel, so plan your runs before cutting. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and heat
This strip must be installed on an aluminium heat dissipating surface for warranty purposes, and an aluminium profile is the simplest way to do it. The profile draws heat away from the LEDs, protects the strip and extends its life. Choose a profile at least 11mm wide inside to suit the 10mm strip, and add a diffuser for the softest line of light. The 3M double sided tape holds it in place in the profile.
IP20 rated for dry indoor locations only.
