* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
LED strip, 19.2w per metre, 3000k, IP54
A bright, high density strip with 240 LEDs per metre for a smooth, consistent line of warm white light. The IP54 coating protects it against dust and light moisture, so it can go in places a bare indoor strip cannot.
Use it for kitchen kickboards, bathroom vanities, laundry shelving and sheltered areas where you want warm ambient light with some protection from the elements.
Key features
- 19.2w per metre, 1560 lumens per metre
- 240 LEDs per metre for an even line
- CRI greater than 80
- 120° beam angle
- 24v DC
- Dimmable
- IP54 protected against dust and splashes
- 10mm wide, 3mm high, 3M double sided tape backing
- Sold per metre or as a 10 metre roll
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 3000k Warm White |
1560 lumens |
Bathrooms, kitchens, living areas |
Choosing a driver
No maximum run length is published for this strip, so size the driver by load: allow 19.2w for every metre and add about 20% headroom. As a worked example, a 5 metre run draws 96w and needs a 24v driver of at least 116w, which in practice means a 150w driver. Split longer installs into separate runs, each with its own feed. The 10 metre roll is supplied as one reel, so plan your runs before cutting. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer. In damp or outdoor locations, use a weatherproof IP66 or IP67 driver or keep the driver under cover.
Mounting and heat
We recommend mounting this strip in an aluminium profile. The profile draws heat away from the LEDs, protects the strip and extends its life, and a diffuser gives a softer line. Choose a profile at least 11mm wide inside to suit the 10mm strip, and seal any cut ends to keep the IP54 protection.
IP54 rated for damp and sheltered spots, such as bathrooms and covered outdoor areas.
