* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
LED strip, 19.2w per metre, 3000k, IP67
This fully sealed strip packs 240 LEDs into every metre for a strong, even warm white glow, and its IP67 casing protects it against dust and water immersion. It is a solid choice where a strip will face moisture, from wet areas to sheltered outdoor joinery.
The 3000k colour suits ambient lighting in homes and hospitality spaces, such as bathroom niches, alfresco bars and under eave details. Buy it by the metre or as a 10 metre roll.
Key features
- 19.2w per metre, 1560 lumens per metre
- 240 LEDs per metre for an even line
- CRI greater than 80
- 120° beam angle
- 24v DC
- Dimmable
- IP67 sealed against dust and water immersion
- 14mm wide, 6mm high
- Sold per metre or as a 10 metre roll
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 3000k Warm White |
1560 lumens |
Bathrooms, alfresco areas, hospitality |
Choosing a driver
No maximum run length is published for this strip, so size the driver by load: allow 19.2w for every metre and add about 20% headroom. As a worked example, a 5 metre run draws 96w and needs a 24v driver of at least 116w, which in practice means a 150w driver. Split longer installs into separate runs, each with its own feed. The 10 metre roll is supplied as one reel, so plan your runs before cutting. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer. In damp or outdoor locations, use a weatherproof IP66 or IP67 driver or keep the driver under cover.
Mounting and outdoor use
This strip must be installed on an aluminium heat dissipating surface to keep the warranty valid, so plan on an aluminium profile at least 15mm wide inside to suit the 14mm strip. Reseal every cut end with an end cap and silicone to keep the IP67 rating, and make any outdoor joins in a waterproof connector or junction box.
IP67 rated against dust and water immersion, suitable for wet areas and demanding locations.
