* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
LED strip, 19.2w per metre, 4000k, IP54
This 4000k strip gives a clean, neutral white from 240 LEDs per metre, with an IP54 coating that keeps out dust and light moisture. It is well suited to task lighting where a little protection goes a long way.
Fit it under kitchen cabinets, along laundry benches, in bathroom shaving cabinets or in workshops and garages that see some dust. It is sold per metre or as a 10 metre roll.
Key features
- 19.2w per metre, 1640 lumens per metre
- 240 LEDs per metre for an even line
- CRI greater than 80
- 120° beam angle
- 24v DC
- Dimmable
- IP54 protected against dust and splashes
- 10mm wide, 3mm high, 3M double sided tape backing
- Sold per metre or as a 10 metre roll
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 4000k Cool White |
1640 lumens |
Kitchens, laundries, workspaces |
Choosing a driver
No maximum run length is published for this strip, so size the driver by load: allow 19.2w for every metre and add about 20% headroom. As a worked example, a 5 metre run draws 96w and needs a 24v driver of at least 116w, which in practice means a 150w driver. Split longer installs into separate runs, each with its own feed. The 10 metre roll is supplied as one reel, so plan your runs before cutting. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer. In damp or outdoor locations, use a weatherproof IP66 or IP67 driver or keep the driver under cover.
Mounting and heat
This strip must be installed on an aluminium heat dissipating surface to keep the warranty valid, and an aluminium profile also protects it and extends its life. Choose a profile at least 11mm wide inside to suit the 10mm strip, add a diffuser for a softer line, and seal any cut ends to keep the IP54 protection.
IP54 rated, so it suits damp and sheltered locations such as laundries and bathrooms.
