* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Side bend neon LED strip, 14.4w per metre, 3000k, IP67
A larger 12mm x 17mm neon profile with 200 LEDs per metre gives this warm white flex a bold, even glow. The side bend design follows horizontal curves smoothly, so it handles decorative outlines and curved features with ease.
Warm 3000k light creates a relaxed feel along garden beds, pool surrounds, bars and building outlines. The IP67 rated housing copes with outdoor and wet conditions, and you can buy it cut to length or as a 20 metre roll.
Key features
- 14.4w per metre, 600 lumens per metre
- 200 LEDs per metre behind a diffused face
- Side bend, follows horizontal curves
- 3000k warm white, CRI over 80
- 120° beam angle
- 12mm wide, 17mm high
- 24v DC, dimmable
- IP67 rated
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 3000k Warm White |
600 lumens |
Gardens, pool areas, hospitality, outlines |
Choosing a driver
Allow 14.4w for every metre and add about 20% headroom. As a worked example, a 5 metre run draws 72w, so it needs a 24v driver of at least 87w, which in practice means a 100w driver. For bigger installs, split the neon into separate runs, each with its own feed. The 20 metre roll is supplied as one reel, so plan your runs before cutting. Outdoors or in wet areas, use a weatherproof IP66 or IP67 driver or keep the driver under cover. To dim the neon, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and outdoor use
Neon flex does not need an aluminium profile. Fix it with mounting clips or a mounting channel. This is a side bend neon, designed to follow horizontal curves, so plan your shapes around that bend direction rather than twisting it. Every cut end must be resealed with an end cap and silicone to keep the IP67 rating, and any outdoor joins should be made in a waterproof connector or junction box.
IP67 rated for outdoor use.
