* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Side bend neon LED strip, 5500k, IP67
Bright 5500k daylight neon that bends sideways to trace shapes, curves and outlines. A dense row of 140 LEDs per metre sits behind the neon face for a clean, unbroken glow, all in a compact 4mm by 8mm size that tucks into tight details.
Weatherproof to IP67, it suits signage, wayfinding, commercial outlines, pool and garden edges and anywhere a sharp, white line of light is wanted. Buy it by the metre or as a 20 metre roll for bigger jobs.
Key features
- Side bend design for curves, outlines and lettering
- 9.6w per metre, 410 lumens per metre
- 140 x 2835 LEDs per metre for an even line of light
- CRI above 80
- 120° beam angle
- 4mm wide, 8mm high
- Cut points every 50mm
- 24v DC, dimmable
- IP67 rated for indoor and outdoor use
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 5500k Daylight |
410 lumens |
Signage, wayfinding, commercial outlines, garages |
Choosing a driver
Allow 9.6w for every metre of strip and add about 20% headroom. As an example, a 5 metre run draws 48w, so it needs a 24v driver of at least 58w, which in practice means a 60w driver. Split longer installs into separate runs, each with its own feed. The 20 metre roll is supplied as one reel, so plan your runs before cutting. Outdoors or in wet areas, use a weatherproof IP66 or IP67 driver or keep the driver under cover. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and outdoor use
Neon flex does not need an aluminium profile. It is a side bend design, so it curves left and right across the mounting surface, which makes it ideal for tracing outlines, edges and lettering on a wall or ceiling. Fix it with mounting clips or a mounting channel and keep bends gentle so the internal strip is not stressed. Reseal every cut end with an end cap and silicone to keep the IP67 rating, and make any outdoor joins in a waterproof connector or junction box.
IP67 rated for indoor and outdoor installation.
