* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Top bend neon LED strip, 14.4w per metre, IP67
This top bend neon flex gives a smooth, continuous line of white light from 200 LEDs per metre, with a square 15mm x 15mm profile that looks neat on show. It bends easily along curves, making it suited to clean architectural lines and accent lighting.
Choose warm, cool or daylight white to match the setting, from homes and gardens to commercial facades. The IP67 construction makes it dependable outdoors and in wet areas, and it is available cut to length or as a 20 metre roll.
Key features
- 14.4w per metre, 600 lumens per metre
- 200 LEDs per metre behind a diffused face
- Top bend profile
- Choice of 3000k, 4000k or 5500k
- 120° beam angle, CRI over 80
- 15mm wide, 15mm high
- Cut points every 50mm
- 24v DC, dimmable
- IP67 rated
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 3000k Warm White |
600 lumens |
Gardens, outdoor living, hospitality |
| 4000k Cool White |
600 lumens |
Facades, architectural lines, signage |
| 5500k Bright Daylight |
600 lumens |
Commercial outlines, display, wayfinding |
Choosing a driver
Allow 14.4w for every metre and add about 20% headroom. As a worked example, a 5 metre run draws 72w, so it needs a 24v driver of at least 87w, which in practice means a 100w driver. For bigger installs, split the neon into separate runs, each with its own feed. The 20 metre roll is supplied as one reel, so plan your runs before cutting. Outdoors or in wet areas, use a weatherproof IP66 or IP67 driver or keep the driver under cover. To dim the neon, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and outdoor use
Neon flex does not need an aluminium profile. Fix it with mounting clips or a mounting channel. This is a top bend neon, so plan your curves in the direction it is designed to bend rather than twisting it sideways. Every cut end must be resealed with an end cap and silicone to keep the IP67 rating, and any outdoor joins should be made in a waterproof connector or junction box.
IP67 rated for outdoor use.
