* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
RGBW top bend neon LED strip, 14.4w per metre, IP67
This top bend neon pairs full RGB colour with a 3000k warm white channel, so it can switch from vivid colour scenes to a relaxed white glow. The 15mm x 15mm profile spreads 200 LEDs per metre into an even, continuous line.
It suits accent lighting, signage, outdoor entertaining and architectural highlights indoors or out. It is IP67 rated, bends to a 60mm radius and is sold cut to length or as a 20 metre roll.
Key features
- RGB colour plus a dedicated 3000k warm white channel
- 14.4w per metre, 450 lumens per metre
- 200 LEDs per metre behind a diffused face
- Top bend profile, minimum bend radius 60mm
- 120° beam angle
- 15mm wide, 15mm high
- Cut points every 62.5mm
- 24v DC, maximum 5 metre run
- IP67 rated
- 3 year warranty
Colour options
| How you run it |
What you need |
Best for |
| Full colour changing |
24v driver plus an RGBW controller |
Outdoor entertaining, bars, events |
| Warm white only |
24v driver plus an RGBW controller |
Everyday ambient light, architectural lines |
| Colour and white blended |
24v driver plus an RGBW controller |
Feature walls, softer colour tones |
Choosing a driver and controller
Allow 14.4w for every metre and add about 20% headroom. A full 5 metre run draws 72w, so it needs a 24v driver of at least 87w, which in practice means a 100w driver. For longer installations, split the neon into runs of 5 metres or less and feed each run separately. Your RGBW controller must also be rated for the full load of the run. The 20 metre roll is supplied as one reel, so plan your runs before cutting. Outdoors, use a weatherproof IP66 or IP67 driver and keep the controller under cover.
Mounting and outdoor use
Neon flex does not need an aluminium profile. Fix it with mounting clips or a mounting channel, keeping bends at a 60mm radius or larger so the internal strip is not stressed. This is a top bend neon, so plan your curves in the direction it is designed to bend rather than twisting it sideways. Every cut end must be resealed with an end cap and silicone to keep the IP67 rating, and any outdoor joins should be made in a waterproof connector or junction box.
IP67 rated for outdoor use.
