High density LED strip, 24w per metre
With 640 LEDs packed into every metre, this high density strip produces a bright, near continuous line of up to 1858 lumens per metre. It is built to be a main light source: cove and bulkhead lighting, high ceilings, long joinery runs and indirect lighting that has to light a whole room.
Fine 13mm cut points let you trim it closely to joinery and ceiling details, and CRI above 90 keeps timber, stone and skin tones looking natural.
Key features
- 24w per metre, 1750 to 1858 lumens per metre
- 640 LEDs per metre for a near continuous line
- CRI above 90 for natural colour
- 120° beam angle
- 10mm wide, 2mm high
- Cut points every 13mm
- 24v DC, maximum 5 metre run
- 3M double sided tape for easy installation
- 5 year replacement warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 2700k Extra Warm White |
1750 lumens |
Living areas, bedrooms, restaurants and bars |
| 3000k Warm White |
1767 lumens |
Living areas, kitchens, joinery, hospitality |
| 4000k Cool White |
1837 lumens |
Kitchens, laundries, workspaces, retail |
| 5000k Daylight |
1858 lumens |
Workshops, garages, display cases, task lighting |
Choosing a driver
Allow 24w for every metre of strip and add about 20% headroom. A full 5 metre run draws 120w, so it needs a 24v driver of at least 144w, which in practice means a 150w driver. For longer installs, split the strip into runs of 5 metres or less and give each run its own feed.
Mounting and heat
At 24w per metre this strip produces real heat, so it must be mounted on an aluminium profile or heat sink. The aluminium draws heat away from the LEDs, protects the strip and extends its life, and a diffuser gives the softest line of light. Choose a profile at least 11mm wide inside to suit the 10mm strip.
IP20 rated for dry indoor locations only.
This range is supplied on quotation. Hit the enquire for price button with your quantities and we will email you a personalised quote.
