Six arms of hand cast poly resin, spreading 660mm across, hand painted so no two pieces come out identical. No deer were involved. The natural tone leaves the texture of the casting visible, which is what stops it looking like moulded plastic.
It ships flat and unassembled, which is the sensible way to move something with six protruding arms through a courier network. That does mean assembly is required before it goes up, and since it is hardwired the practical approach is to have your electrician build it and install it in the one visit.
Six E14 lamp holders take up to 42w each and globes are not included. Small clear candle globes keep the arms looking light; opal candles give a softer glow if the fitting hangs low. Overall height is 1650mm on a 1200mm clear PVC cord, so it suits a stairwell void, a high entry, or a round dining table where the 660mm spread has room to breathe. Give it clear air. Crowded against a wall or under a low ceiling the silhouette gets lost.
Specification:
- Colour: Natural
- Finish: Hand Painted
- Fitting Material: Resin
- Globe Qty: 6
- Bulb Included: No
- Globe Base: E14
- Wattage (max): 42w
- Voltage: 240v
- Cord / Wire Material: CLEAR PVC
- Warranty: 12 Month Replacement
Dimensions:
- Height: 390mm
- Width: 660mm
- Depth: 660mm
- Overall Height: 1650mm
- Canopy: ø120mm x 80mm
- Cord Length: 1200mm
Assembly
If this fitting is supplied unassembled to reduce shipping cost and minimise damage, some assembly by the customer or the installing electrician may be required.
Installation
If this fitting requires installation, connection to the mains electrical supply, that installation must be performed by a licensed electrician in accordance with the wiring standard.
If this is a hardwired light fitting, and not specifically labelled "DIY", it must be installed by a licenced electrician.
Warranty
The majority of our products come with a 12 month replacement guarantee.
The product should be returned to the place of purchase.
