Features:
- Inground Uplighter Round
- Stainless Steel 316 Marine Grade Cover
- Aluminium Body
- Flush Tempered Glass
- 60° Beam Angle
- Trafficable to 1000kg
- IP rating: IP67
- IK rating: IK10
- Input Voltage: Available in either 240v AC or 12v DC
- Built in 30w LED
- Tri Colour
- 3000k, 4000k, 5500k
- CRI: >80
- Dimmable: No
- Optional Honeycomb Lens - HV1834-HC
- Optional Security face with screws - HV1834-F-SH
- 3 Years Replacement Warranty
Dimensions:
- Diameter: ø210mm
- Height: 205mm
- Cut Out: ø188mm (w/o canister)
| Part Number |
|
Colour Temperature |
|
Lumens
|
|
Input Voltage
|
|
HV1834T-12V |
. |
3000k
4000K
5500K |
. |
2400lm
2550lm
2700lm
|
. |
12v DC
|
. |
HV1834T-240V |
|
3000k
4000K
5500K |
|
2400lm
2550lm
2700lm |
|
240v AC
|
|
Choosing a driver
The 12v DC version runs on low voltage and needs a 12v LED driver, installed by a licensed electrician. The 240v version wires straight to mains and does not need a driver.
Allow 30w for each inground light and add about 20% headroom. 2 inground lights draw 60w, so they need a 12v driver of at least 72w, which in practice means a 100w driver.
| 12v driver size |
Maximum inground lights |
| 60w |
1 |
| 100w |
2 |
| 150w |
4 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with the voltage drop calculator below.
Outdoors, use a weatherproof IP66 12v driver and mount it above ground, clear of garden beds and pooling water.
Planning your install? Use our voltage drop calculator to choose the right cable size for your run and keep every light at full brightness.
