The Nella Surface Mounted LED Downlight provides a modern and practical lighting solution suitable for both indoor and outdoor environments. Its aluminium body with a powder-coated black or white finish offers a clean architectural appearance that suits contemporary spaces. The included honeycomb lens helps minimise glare while delivering focused and comfortable illumination. With five selectable colour temperatures, the light can be easily adjusted to match different environments and lighting needs. An IP65 rating also makes it suitable for bathrooms, alfresco areas, and other moisture-prone locations.
12v model must be used with a suitable 12v DC LED Driver.
Choosing a driver
The 12v DC version runs on low voltage and needs a 12v LED driver, installed by a licensed electrician. The 240v version wires straight to mains and does not need a driver.
Allow 24w for each downlight and add about 20% headroom. 2 downlights draw 48w, so they need a 12v driver of at least 58w, which in practice means a 60w driver.
| 12v driver size |
Maximum downlights |
| 30w |
1 |
| 60w |
2 |
| 100w |
3 |
| 150w |
5 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with our voltage drop calculator.
Outdoors, use a weatherproof IP66 12v driver and mount it above ground, clear of garden beds and pooling water.
💡 Not sure how many you need? Try our free downlight calculator to work out quantity and spacing for your room.
