Description:
- Single Adjustable Spike Spotlight
- Aluminium Poly Powder Coated Black or 316 Stainless Steel
- 90° Tilt
- Beam Angle: 60°
- 170mm Spike Length
- 2m Reinforced Cable
- RGB + 3000k
- IP rating: IP65
- Input Voltage: 12v DC
- 5w COB LED Globe
- 3 Years Replacement Warranty
Order Code:
- HV1462RGBW-SS316 - 316 Stainless Steel
- HV1462RGBW-BLK - Black
Must Be Used With Suitable 12v DC LED Driver
Choosing a driver
This spike light runs on 12v DC, so it needs a 12v LED driver (sometimes called a transformer). It cannot connect straight to 240v mains. The driver is wired in by a licensed electrician.
Allow 5w for each spike light and add about 20% headroom. 10 spike lights draw 50w, so they need a 60w 12v driver.
| 12v driver size |
Maximum spike lights |
| 30w |
5 |
| 60w |
10 |
| 100w |
16 |
| 150w |
25 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with the voltage drop calculator below.
Outdoors, use a weatherproof IP66 12v driver and mount it above ground, clear of garden beds and pooling water.
Planning your install? Use our voltage drop calculator to choose the right cable size for your run and keep every light at full brightness.
