Description:
- Pinta Step Light with Large Eyelid
- Copper Face
- 316 Stainless Steel Body
- Tempered Glass
- IP rating: IP54
- CRI: 80
- Dimmable: No
- Input Voltage: 240v AC or 12v DC
- 3 Years Replacement Warranty
12v Fittings Must Be Used With Suitable 12v DC LED Driver
| Order Code |
Colour Temperature
|
Lumens
|
Input
|
Beam Angle |
Included LED
|
| HV2916 |
N/A |
N/A |
240v AC |
N/A
|
G9 25w Max.
No Globe Supplied |
| HV2917 |
N/A |
N/A |
12v DC
|
N/A
|
G4 20w Max.
No Globe Supplied |
| HV2918C |
5500k |
180lm |
240v AC
|
120° |
2.3w Built in LED |
| HV2918W |
3000k |
160lm |
240v AC
|
120°
|
2.3w Built in LED |
| HV2919C |
5500k |
180lm |
12v DC |
120°
|
2.3w Built in LED |
| HV2919W |
3000k |
160lm |
12v DC
|
120°
|
2.3w Built in LED |
Choosing a driver
The 12v versions (HV2917 and HV2919) run on low voltage and need a 12v LED driver, installed by a licensed electrician. The 240v versions wire straight to mains and do not need a driver.
Allow 2.3w for each step light and add about 20% headroom. 10 step lights draw 23w, so they need a 12v driver of at least 28w, which in practice means a 30w driver.
| 12v driver size |
Maximum step lights |
| 30w |
10 |
| 60w |
21 |
| 100w |
36 |
| 150w |
54 |
The HV2917 takes a G4 globe that is not supplied. Add up the wattage of the globes you fit (20w maximum each) and size the driver the same way, with about 20% headroom.
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with our voltage drop calculator.
Indoors, an indoor 12v driver mounted in the ceiling space works well. If the light is going outdoors or under eaves, use a weatherproof IP66 12v driver.
