The Diginet MEDM Dimmer was the first dimmer that gave The Lighting Outlet confidence again to sell dimmers for LED products as the early stages of LED dimmers had continual problems, our electricians swear by the Diginet LED Smart Dimmer and will not muck around with anything else as it gets the job done headaches free. This LED dimmer, even dims some non-dimmable products, it's that good!
The Diginet MEDM Adaptive Phase Dimmer switch is designed in Australia to provide optimised dimming of LED-based lamps and drivers, this high quality, two-wire phase control wall plate dimmer has a minimum load rating of 2W, allowing it to adapt to a wide range of available LED drivers.
Although optimised for LED lighting loads, this LED smart dimmer also provides excellent compatibility with other common lamps types such as incandescent lamps, 12V halogen (dichroic) lamps /transformers and CFL’s.
Features:
- Analogue rotary dial with hard stop at max and min
- Green LED indicator
- Green light is on when the lights are on, off when the lights are off
- Min/Max brightness setting via mechanical adjustment
- Soft start
- Short circuit and thermal protection
Please note: MEDM dim only. They do not switch a light on/off.
Specifications:
- Colour: Blue
- Function: Rotary Dimmer
- Indicator: Green LED
- Mechanical set max or min: Yes
- Electrical connections: 2-wire (Active and Load, no Neutral required)
- Nominal Line Voltage: 220-240Vac
- Line Voltage Frequency: - 50Hz Nominal (47 - 53Hz)
- Load Brightness Range: 0% to 100% (typical for LED loads)
- Maximum Load: 250w - 400w (Refer to compatible load table on Tech Spec)
- Minimum Load: 2w
- Mounting: Standard Australian wall plate aperture
Dimension:
Order Code:
MEDM - Adaptive Phase Rotary Dimmer
